Wiki User
∙ 10y agoYou could never walk around 7 square acres.
An acre is a measure of area in 2-dimensional space. So a square acre is a measure of hyper-voume in 4 dimensional space. Assuming that you are a normal human being, you are limited to 3-dimensional space and walking in 4-d space is not possible.
Wiki User
∙ 10y agoThere are 43,560 square feet in one acre. Therefore, 43,560 times 165 acres = 7,187,400 square feet. I have known and used this conversion factor for years, but just to be sure, I verified it at the website given above.
75 ft. times 75 ft. equals 5,625 square feet. 5,625 square feet = 0.1291322314 of an acre
There is no way to answer this without knowing the dimensions of the five-acre area. If the area is long and narrow it will be fewer trips than if the area were square or round.
5 acres = 24,200 sq yards. If this is a circle, d = 175.5 yards, and circumference = 551.5 yards. Any other shape will have larger perimeter. If it is a square for instance, side of square will be 155.56 yards so perimeter will be four times this = 622.25 yards.
0.5 acres = 21,780 square feet.So you know that (length) times (width) must be 21,780 but there are noother constraints on what the dimensions must be. There are an infinite numberof possible length/width combinations.
114006 square miles times 640 acres in a square mile is 72,963,840 acres.
four times the square root of 6.3 acres (You'll need to convert acres to the square of a distance unit.)
Answer: 930 ft² = 0.021349 acres.
Answer: 1,000,000 acres = 1562.5 square milesIf the million areas was shaped like a square, each side of the square would be about 39.53 miles. (Square root of 1562.5)The distance around the square would be about 158.12 miles. (39.53 miles times 4)Note: There is error introduced by rounding.
One acre has 43,560 square feet. That times .5557 gives you a total of 24,206 square feet.
There are 4840 square yards in an acre. In 12 acres, there are 12 times that, so here's the math: 4840 x 12 = 58,080 square feet
Multiplying 2640 feet by 17 feet gives us the total square footage. Then divide by 43,560 (the number of square feet in an acre) to convert to acres. So, 2640 times 17 feet equals 44,880 square feet, which is approximately 1.03 acres.
One acre has 43,560 square feet. So 33 times that number gives you 1,437,480.
It should be obvious to anybody that the answer will be different for 50000 square miles, 50000 square inches, 50000 square metres or 50000 of any other unit. As long as no units are specified in the question, there can be no sensible answer.
There are [ (150) times (the area of each square in square feet) ] square feet.
An area of 7500 square feet are 0.1721763 acres.
1.4 million acres is equivalent to about 2,188 square miles. To put it into perspective, it is roughly the size of three and a half times the area of the city of Los Angeles.