10-ft x 15-ft = 150 square feet = (16 and 2/3) square yards
5.64 sq yd
The width 12 feet is four yards, so the area would be 4 yards * 50 yards = 200 square yards. You would need 200 square yards of carpeting to cover that area.
You will need a minimum of 38.6 square yards of carpet to cover that area.
Area of circle of 132 inch diameter = 13684*78 sq inches = 10.56 sq yards.
To cover a 12 x 36 board, you need to calculate the total area of the board, which is 12 square feet (1 square foot = 12 inches). The board's dimensions in inches are 12 inches by 36 inches, giving you a total area of 432 square inches. Since there are 36 inches in a yard, you'll need 1 yard of fabric (36 inches) to cover the board, as 1 yard of fabric provides 36 inches in width and can easily accommodate the 36-inch length of the board. However, if you want to ensure proper draping or wrapping, consider getting about 1.5 yards total.
Area of first piece = 5 yards * 60 inches = 300 inch-yards Suppose length of equivalent area of 57" fabric is x yards then x*57 = 300 or x = 300/57 = 5.26 yards (approx).
5.64 sq yd
The cover factor is the ratio of the area covered by the yarn to the whole area of the fabric .
To cover a 10 x 8 foot window, you'll first need to calculate the total area, which is 80 square feet. Since fabric is typically sold by the yard, convert the area to yards: 80 square feet is approximately 8.89 square yards (1 square yard = 9 square feet). Depending on the desired fullness and whether you want to add extra for hems or patterns, you might need around 10 to 12 yards of fabric for a full and aesthetically pleasing look.
The cover factor of fabric can be calculated using the formula: Cover Factor (CF) = Area of yarn per unit area of fabric. This involves determining the total cross-sectional area of the yarns in a given area of fabric and dividing it by the total area of that fabric. The cover factor provides insight into how much of the fabric's surface is occupied by the yarns, influencing its opacity and durability. Typically, measurements of yarn diameter and the density of yarns per unit area are required for accurate calculations.
The cover factor is the ratio of the area covered by the yarn to the whole area of the fabric .
To calculate the yards of fabric needed to cover a sofa, you typically use the formula: Total Fabric Needed (in yards) = (Sofa Length (in inches) + Sofa Width (in inches) + Sofa Height (in inches)) / 36. This formula accounts for the total surface area, including cushions and any additional features. It's advisable to add an extra 10-20% for seams, pattern matching, and any mistakes. Always refer to the specific sofa dimensions and design for a more accurate estimate.
The formula for fabric consumption can be calculated using the following equation: [ \text{Fabric Consumption (yards/meters)} = \frac{\text{Total Garment Area (square yards/square meters)}}{\text{Width of Fabric (yards/meters)}} ] To determine the total garment area, you need to consider the pattern pieces, seam allowances, and any additional fabric for design elements. Always account for wastage as well, typically adding an extra percentage for cutting errors and fabric defects.
Don't quite understand what you're getting at. -- If you need to cover an area of 208 square feet with fabric, then you need 208 square feet of fabric to cover it, -- If the fabric is coming off a roll, then the length you need to cut off the roll is (208) divided by (width of the roll, in feet). -- It might help in your situation to know that 208 square feet is 23.11 square yards. (rounded)
The width 12 feet is four yards, so the area would be 4 yards * 50 yards = 200 square yards. You would need 200 square yards of carpeting to cover that area.
You will need at least 32 square yards of carpet to cover that area.
You will need a minimum of 38.6 square yards of carpet to cover that area.