0
Assuming you're using the builder's abbreviation of yard for cubic yard (eg a 6 yd skip holds 6 cubic yds):
1 yd = 3'
⇒ 24' x 30' x 1' = (24 ÷ 3 yds) x (30 ÷ 3 yds) x (1 ÷ 3 yds)
= 262/3 cu yds
≈ 26.67 cu yds
So you'll need enough sand for the above volume.
Add your answer:
Earn +20 pts
How many yards of dirt would it take to fill an area 250 feet wide by 80 feet long by 8 feet high?
A "yard" is actually a cubic yard and contains 27 cubic feet (3X3X3=27). To find the volume of your area, multiply length times width, times height (or depth). 250X80X8=160,000 cubic feet. Divide that by 27 and you get approximately 5925.9 cubic yards. If you want to know the weight of your fill, you will need to determine the specific composition of your dirt and then calculate the weight of a cubic foot or yard of it.
What is the surface area of a rectangular prism that is 3 yards 4 yard wide and 5 yards high?
The surface of a rectangular prism would be 60 yards. This is use in math.
How much sand do you need to fill a circle with a 19 foot diameter and 14 inches high?
330.78 ft3
How many yards of dirt would it take to fill an area 12 feet wide by 78 feet long by 6 inches high?
1 cubic yard = 27 cubic feet6 inches = 1/2 footVolume of the ditch = (12 x 78 x 1/2) = 468 cubic feet = 17 1/3 cubic yards
The height of niagara falls is 182 feet How many yards high is it?
60.6 yards high.
How many liters does it take to fill 10500 square feet?
It depends on how high you would like to fill it. You see, a liter is a 3-dimensional measure of volume (like a cubic foot is), and a square foot is a 2-dimensional measure of area. So, for example, to fill an area of 10,500 square feet to a height of 1 foot, you would need 297,326.889 liters.
How many cubic yards of dirt will it take to fill an area 12 inches wide by 25 feet long by 4 inches high?
Sorry the first answer was in square yds. Cubic yards would be 0.308639
How many yards of dirt would it take to fill an area 250 feet wide by 80 feet long by 8 feet high?
A "yard" is actually a cubic yard and contains 27 cubic feet (3X3X3=27). To find the volume of your area, multiply length times width, times height (or depth). 250X80X8=160,000 cubic feet. Divide that by 27 and you get approximately 5925.9 cubic yards. If you want to know the weight of your fill, you will need to determine the specific composition of your dirt and then calculate the weight of a cubic foot or yard of it.
How much sand would it take to fill an area 15 feet wide by 27 feet long by 4 inches high?
It would take 135 cubic feet = 5 cubic yards.
What is the surface area of a cylinder with a diameter of 1 foot and 3 feet high?
A cylinder with a diameter of 1 foot and 3 feet high has a surface area of 11 square feet.
What is the physical size of a high school football field playing area?
100 Yards.
What is the surface area of a rectangular prism that is 3 yards 4 yard wide and 5 yards high?
The surface of a rectangular prism would be 60 yards. This is use in math.
How much sand do you need to fill a circle with a 19 foot diameter and 14 inches high?
330.78 ft3
How high is 120 meters in yards?
About 131.2 yards high.
How many yards of soil would you need to buy in order to fill up a garden whose measurements are 25 feet long by 18 feet wide by 8 inches high?
"How many yards of soil would you need to buy in order to fill up a garden whose measurements are 25 feet long by 18 feet wide by 8 inches high?"
How many yards of top soil will you need to cover any area 55 feet x 15 feet and 3 inches deep?
First you need to understand that the "yard" of material is really a cubic yard (3 x 3 x 3) or 27 cubic feet. Each cubic foot is 12 inches by 12 inches by 12 inches. you begin by multiplying the 15 foot width by the 55 foot length. (15 x 55 = 825) If you assume that you have a 12 inch high fill then all you have to do is divide 825 by 1/4(3 inches) to get the number of cubic feet of top soil. divide again by 27 to get the number of cubic yards.
What is the area ofthe square yards of 6 ft wide and 4 ft high?
24 sq. ft.
