0
Still curious? Ask our experts.
Chat with our AI personalities
Vivi
Rafa
FranAdd your answer:
Earn +20 pts
How much is 5000 km?
5000000 m 500000000 cm 5000000000 mm 5000000000000 micrometer 5000000000000000 nm 3106.856 mi 5468066 yards 1640400 ft 19685000 in
60 ft pounds equals newton meters?
60 ft lbs is a little more than 80 newton meters it is 81.33 nm
How many km in 1 noticalmile?
1 nm is 6000 ft, 1 statute mile is 5280 ft and 1.6 km. 1.6 x (6000/5280) = 1.8181km
How much ft is 65 in.?
5 ft 5 in. or 5.42 ft.
How much ft is 42 inches?
(42 in)(1 ft/12 in) = 3.5 ft
What are the camshaft torque settings on a corsa 1.7 diesel?
14 lbf ft or 19 Nm
Nm to ftlb conversion?
Newton meters (Nm) multiplied by 0.738 = Pounds-force feet (lbf ft; lb ft). Pounds-force feet multiplied by 1.356 = Newton meters.
What are the front and rear axle nut torque specifications for a 2003 Honda XR100 motorcycle?
Front axle = 55 lbf-ft. Pinch bolts = 9 lbf-ft. Rear axle = 80 lbf-ft.
What is the torque on the flywheel bolts in a 1993 Mazda 626?
This applies to all 1993 to 2002 Mazda 626's: FS & FS-DE ENGINE 2.0L ATX Drive Plate = 71-75 ft-lbf 2.0L MTX Flywheel = 71-75 ft-lbf 2.0L MTX Clutch Cover = 14-19 ft-lbf KL-DE & KL-G4 ENGINE 2.5L ATX Drive Plate = 45-49 ft-lbf 2.5L MTX Flywheel = 45-49 ft-lbf 2.5L MTX Clutch Cover = 14-19 ft-lbf :)
What is the torque spec on the oil drain plug on a 2002 focus?
Haynes Manual states that for focus builds between 2001 and 2004 the recommended torque spec for the oil drain plug is 37 Nm / 27 lbf ft.
What is the torque setting on the front axle of a CR85 Honda?
It is 46 lbf-ft.
How much is 130-140 ft-lbs in nm?
To convert foot-pounds (ft-lbs) to Newton-meters (Nm), you can use the conversion factor 1 ft-lb = 1.35582 Nm. Therefore, 130-140 ft-lbs is approximately 176.5-189.2 Nm.
How do you convert Hz to lbf?
You can not convert. Hertz is the frequency in an electrical AC system. lbf is what. If it is suppose to represent ft/lbs there is still no conversion between the two values.
What is 200 lbf in lbm?
To convert 200 pounds-force (lbf) to pounds-mass (lbm), we need to divide by the acceleration due to gravity, which is approximately 32.2 ft/s^2. Therefore, 200 lbf is equivalent to about 6.21 lbm.
How many psi in 1 pound ft?
Um... there are 1 psi (lb/in2) = 144 psf (lbf/ft2) , if by (lb ft) you meant pounnds per square foot. then there is 1/144 psi in 1 (lbf/ft2)
What is 45 NM converted into Foot pound?
To convert 45 Newton meters (Nm) into foot pounds (ft-lb), you can use the conversion factor: 1 Nm = 0.737562 ft-lb. Thus, 45 Nm is approximately equal to 33.191 ft-lb.
What is the peak torque of a 1999 dodge ram with a 5.2 liter V8?
300 ft-lbf at 3200RPM
