0
One yard of crushed rock typically covers an area of about 100 square feet at a depth of 3 inches. If you use a different depth, the coverage area will vary; for example, at 2 inches deep, one yard would cover approximately 150 square feet. Always consider the specific depth you plan to use to determine the exact coverage needed.
What else can I help you with?
How much area does a ton of topsoil cover?
one ton equals one cubic meter of soil was 100mm deep it would cover 7sqm
How much area will 35 square feet cover?
"Square feet" aren't things that are used to cover area."35 square feet" is an amount of area that you have to cover with something.
How much area would your lungs cover if opened up?
________________________________________________________________ that depends on the size of the lung, as it is a little different in each person
How much sod would you need for a 10 ft by 11 ft area?
Assuming that the sod will just cover the surface area of the plot, multiply the width by the length to get the surface area of the spot you want to cover with sod.10 x 11 = 110So you would need 110 square feet of sod.
How much cement will you need to cover 180 square feet?
How much cement is needed to cover 192 square feet of area
How much crushed rock covers 30 sq. ft.?
The answer will depend on how fine the rock is crushed and the depth to which the area needs to be covered.
How much top soil would it take to cover 48X32 area?
48x32 what and to what depth.
How much crushed red pepper would one small dried pepper yield?
how much crushed red pepper would one small dried pepper yield
How much area does 2 yards of gravel cover?
It would depend on how thick you want to spread it.
Does Alaska cover half the US?
No, the area of Alaska compared to the U.S. is about that of 0.175. So, Alaska would cover only 17.5% of the U.S. with its area; much less than half.
What would be the best way to build a penny boat?
try to cover as much surface area as possible.
How much area does a ton of topsoil cover?
one ton equals one cubic meter of soil was 100mm deep it would cover 7sqm
How much area did the roman civilization cover?
they covered area
How much land area does it cover?
it covers about 193
How much area would 5 cf of rock cover?
To determine how much area 5 cubic feet (cf) of rock would cover, you need to know the depth of the rock layer you want to create. For example, if you spread the rock to a 1-inch depth, it would cover approximately 60 square feet (since 5 cf equals 60 cubic inches). If the depth is different, you can adjust the area accordingly by using the formula: Area = Volume / Depth.
How much area will 35 square feet cover?
"Square feet" aren't things that are used to cover area."35 square feet" is an amount of area that you have to cover with something.
How much area does 27000 gallons of water cover?
The area that 27,000 gallons of water can cover depends on the depth of the water layer. For example, if the water is spread evenly to a depth of 1 inch, it would cover approximately 20,000 square feet. If the depth were 2 inches, it would cover about 10,000 square feet. Therefore, the coverage area varies significantly with the thickness of the water layer.
