The answer depends on the thickness of the covering layer. That, in turn will depend on what the soil is for: lawn will require less depth than flower beds.
one ton equals one cubic meter of soil was 100mm deep it would cover 7sqm
"Square feet" aren't things that are used to cover area."35 square feet" is an amount of area that you have to cover with something.
________________________________________________________________ that depends on the size of the lung, as it is a little different in each person
Assuming that the sod will just cover the surface area of the plot, multiply the width by the length to get the surface area of the spot you want to cover with sod.10 x 11 = 110So you would need 110 square feet of sod.
How much cement is needed to cover 192 square feet of area
48x32 what and to what depth.
It would depend on how thick you want to spread it.
No, the area of Alaska compared to the U.S. is about that of 0.175. So, Alaska would cover only 17.5% of the U.S. with its area; much less than half.
try to cover as much surface area as possible.
one ton equals one cubic meter of soil was 100mm deep it would cover 7sqm
they covered area
it covers about 193
To determine how much area 5 cubic feet (cf) of rock would cover, you need to know the depth of the rock layer you want to create. For example, if you spread the rock to a 1-inch depth, it would cover approximately 60 square feet (since 5 cf equals 60 cubic inches). If the depth is different, you can adjust the area accordingly by using the formula: Area = Volume / Depth.
"Square feet" aren't things that are used to cover area."35 square feet" is an amount of area that you have to cover with something.
________________________________________________________________ that depends on the size of the lung, as it is a little different in each person
LAN setup can cover like a build
rfergfred