answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How much can a 10mm chain hold?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much weight can a 10mm screw hold?

The weight a 10mm screw can hold depends on factors such as the material it's made of, the type of thread, and the conditions it's being used in. As a general guideline, a 10mm screw made of steel can typically hold around 100-200 pounds in a static load situation. It's always best to refer to specific load-bearing data provided by the manufacturer for accurate information.


Can a colt mk iv series 80 be converted for the magazine to hold 10mm rds and the gun to fire 10mm rds?

No


How do you tighten up a chain on a 185 Honda 3 wheeler?

This is how you tighten a loose cam chain. On the honda 185s three wheelers there is a cam chain tensioner on the motor. First you need a 14mm wrench and a 10mm wrench and a screw with a fine thread now to get started you take the rubber boot off. Then you take the 10mm bolt off you put the fine thread screw in the hole. Then you start the motor up and loosin the 14mm locking nut while you do that you push down and lift up on the screw but hold the screw up and then tighten the locking nut and you should have the cam chain tightened.


How much is 150 millimeters in centimeters?

10mm=1cm 1cm/10mm=x/150mm cross multiply 150mmx1cm=150cm(mm) divide by 10mm 150cm (mm)/10mm= 15cm


How much is centimeters in millimeters?

every 10mm=1cm or 1cm=10mm.


How much mm are in 1cm?

There are 10mm in 1cm.


How much is 8mm?

== 1 centimeter== 10mm == 1 centimeter= 10mm 8 mm= .8 centimeter === ===


What is a 'Bow-stopper' and 'Chain stoppre?

A bow stopper is a fitting to secure the anchor chain or rode to the vessel's bow when the anchor is raised. A chain stopper is used to hold the anchor chain in place and relieve strain on the windlass when the anchor is deployed or retrieved.


How much is 40mm om inches?

1in = 2.54cm 1cm = 10mm 40mm x 1cm/10mm x 1in/2.54cm = 1.57in


Have to hold handle down to flush so you shortened chain and replaced flapper now the toilet wont stop running?

You shortened the chain too much. Make it longer a link at a time till it works.


How much coolant does a 96 Prizm hold also does it have a timing belt or chain like the 2000?

For a total refill, the system holds 6 quarts. And it has a timing belt, not a chain. If you have 1.6 L engine, a timing belt. If the 1.8 L engine, a timing chain.


How much is 10mm in inches?

If you were to convert 10mm to an inch it would be .3937. Direct Conversion Formula 10 mm* 1 in 25.4 mm = 0.3937007874 in