0
What else can I help you with?
How much does sand weight per cubic feet?
Around 750 g
How much area will 40 lbs of sand cover at 1 deep?
The area that 40 pounds of sand will cover at a depth of 1 inch can be estimated based on the density of sand, which is typically around 100 pounds per cubic foot. Since 40 pounds of sand is about 0.4 cubic feet, and 1 inch is ( \frac{1}{12} ) of a foot, the area covered would be approximately 4.8 square feet. Therefore, 40 pounds of sand will cover roughly 4.8 square feet at a depth of 1 inch.
How much is 10 inches per second when converted into feet per minute?
50 feet per minute.
How much can ten miles per hour to feet per second?
10 miles per hour = 142/3 feet per second
How many pounds of sand to fill a 30ft round pool floor with 2 inches of sand?
At 12 inch per foot that is 3.14x30x30*2/12/4 = 117.75 cubic feet of sand at 100 pounds per cubic foot = 11,775 pounds (5.88 tons). Since a yard is 27 cubic feet that is 117.75/27 = 4.4 yards
How much does sand weight per cubic feet?
Around 750 g
How much does one shovel full of sand weight?
Dry sand weighs about 100 lbs. per cubic foot.There are 27 cubic feet in a cubic yard, so that would make the weight of dry sand about 2700 lbs. per cubic yard.To see the weight of wet sand and many other common materials, click the "Actual Weight of Sand can be found here:"link below!
How do you convert sand from kg to Cubic feet as per IS?
Divide by its density.
How much sand do I need to cover 2500 square feet 4 deep?
A 2500 square foot area x 4' deep is 10000 cubic feet. So you need 10,000 cubic feet of sand. Dry sand has a density of 80-100 pounds or so per cubic foot, so that's somewhere between 800,000 and a million pounds of sand.
How many pounds of sand in 143 cubic feet?
14,300 pounds. Sand has a density of 100 pounds per cubic foot.
How many cubic feet in one ton of m sand?
Masonry sand is estimated to weigh approximately 160 pounds per cubic foot. Therefore, it would take 12.5 cubic feet of masonry sand to equal one ton.
How many kilograms in a cubic feet or cubic meter of sand?
It depends on the moisture content of the sand (wet or dry) but as general rule of thumb there is 1.5 tonne of sand per cubic metre or to answer your question correctly 1500Kg per cube.
How much is 10 inches per second when converted into feet per minute?
50 feet per minute.
How much feet is in Miles?
5,280 feet per mile.
How much is176 feet per minute?
176 feet per minute equates to two miles per hour.
How much does a cubic yard of concrete sand weigh?
That depends on the pounds per cubic feet (PCF) of the the sands. Sand will vary from one place to another. Assuming 106.5 pcf, 1 cubic yards (27 cubic feet) would be 1.44 tons, but 2 tons would be the 2 tons recommended order for safety's sake. A like to a sand calulator is attached.
How much does 55 gallons of wet sand weigh?
On average, wet sand can weigh around 120-150 pounds per cubic foot. Given that 1 gallon is approximately 0.1337 cubic feet, 55 gallons of wet sand may weigh between 725-910 pounds.
