3ft x 3ft x 1ft = 9 cubic feet of dirt will be needed.
Just multiply 1/2 foot x 12,000 square feet. The answer will be in cubic feet.
I'm pretty sure you just have to find the volume of the hole. The answer might sound weird because you didn't say the type of measurement the hole is using but oh well. So if it's 71 by 71 and 6 deep, you just do 71x71x6. And that gives you....hmmm.....ummm.....got it! It gives you 30,246 dirt! I told you it sounds weird without the types of measurements, but it'll do. You would need 30,246 amount of dirt.
To determine how much sand is needed to fill a hole that measures 8 feet long, 8 feet wide, and 3 feet deep, you can calculate the volume of the hole by multiplying the dimensions: 8 x 8 x 3 = 192 cubic feet. Therefore, you would need 192 cubic feet of sand to fill the hole completely.
about 432 cubic inches
About 21 cubic feet
There is no dirt in the hole, otherwise it would not be a hole! If you want to know how much dirt is required to fill the hole, or, equally, how much dirt has been removed to make the hole, that is the volume of the hole itself, then: The volume of the hole is length x width x height. The height is in inches, so must be converted to feet first: 12 in = 1 ft ⇒ 1.5 in = 1.5 ÷ 12 ft The volume of the hole is then: 19 ft x 6 ft x 1.5 ÷ 12 ft = 14.25 cu ft
how much 1" rock will I need to fill in a hole 20' long, 2' wide' and about 2' deep
You need 13 yrd's of fill
Volume = Length x width x height =4x15x15 =900 Cubic Feet
Just multiply 1/2 foot x 12,000 square feet. The answer will be in cubic feet.
I'm pretty sure you just have to find the volume of the hole. The answer might sound weird because you didn't say the type of measurement the hole is using but oh well. So if it's 71 by 71 and 6 deep, you just do 71x71x6. And that gives you....hmmm.....ummm.....got it! It gives you 30,246 dirt! I told you it sounds weird without the types of measurements, but it'll do. You would need 30,246 amount of dirt.
To calculate the volume of a hole that is 6 feet long, 6 feet wide, and 6 feet deep, you multiply the dimensions: 6 ft x 6 ft x 6 ft = 216 cubic feet. Since there are 27 cubic feet in a cubic yard, you divide 216 by 27, resulting in 8 cubic yards of dirt needed to fill the hole.
112 cuft
The fill hole is the dipstick hole itself. You usually need a long funnel to get fluid into it, and it's slow to fill because of this.
post a lisitng on cleanfill.net in the need fill section its free
To determine how much sand is needed to fill a hole that measures 8 feet long, 8 feet wide, and 3 feet deep, you can calculate the volume of the hole by multiplying the dimensions: 8 x 8 x 3 = 192 cubic feet. Therefore, you would need 192 cubic feet of sand to fill the hole completely.
about 432 cubic inches