A square foot of quartz has no definite weight because a square foot has no thickness.
Dead weight per square foot is calculated in the following fashion: a = building weight b = square footage of building c = building dead weight/ SF c = a/b
if the slab is one inches thick, it should be 8.8 pound per squire foot.
Specific weight is the weight of the material per unit volume. Water has the specific weight of 62.43 pounds per cubic foot or 9.807 Newtons per cubic meter.
three lbs
About 3.39 lbs per linear foot
It depends. Dry ,around 30 lbs. Wet, triple that. Most treated wood is wet when you see it in the store, When it dries ,it shrinks,warps and cups.Sometimes a lot,sometimes a little.
is weight per foot the same as pounds pre square foot
The weight of 350 MCM (thousand circular mils) per foot depends on the material it is made of. For example, copper 350 MCM wire weighs approximately 2.6 pounds per foot, while aluminum 350 MCM wire weighs around 1.6 pounds per foot.
Around 20 to 25 pounds per square foot.
Granite is figured at 168 pounds per cubic foot. If you know the thickness, you can determine the weight per square foot.
The weight of bluestone can vary, but on average it weighs around 170 pounds per cubic foot.
The weight of SA 516-70 steel plate per square foot varies depending on the thickness of the plate. As a general estimation, the weight of SA 516-70 steel plate is approximately 41.82 pounds per square foot for a 1-inch thick plate. You can calculate the weight for different thicknesses using this basic weight per square foot.
Depends on the structural integrity of the deck.
Granite is figured at 168 pounds per cubic foot. If you know the thickness, you can determine the weight per square foot.
A square foot of quartz has no definite weight because a square foot has no thickness.
The density of a substance is usually measured in weight units per volume (for example, per cubic foot), not per area. For a square foot... it would depend how thick the slab of granite is. That may vary between different manufacturers.