The cost of 8 feet of slate can vary widely depending on the type, quality, and source of the slate. On average, slate can range from $10 to $20 per square foot, meaning 8 feet could cost between $80 and $160 or more. Additionally, installation costs and local market prices may affect the total expense. It's best to check with local suppliers for precise pricing.
Total cost = 640.00
To cover a length of 22 feet, you need to purchase 8 yards of border, since 1 yard equals 3 feet, and 22 feet divided by 3 feet per yard equals approximately 7.33 yards (rounded up to 8 yards for whole numbers). At a cost of $8.75 per yard, the total cost for 8 yards would be 8 yards x $8.75 = $70.00.
26246.7 feet
8,17 feet(8 feet, 2 inches)(8 1/6 feet)
It is 7/12 to 8/12 feet or 0.5833 to 0.6667
446.4
Total cost = 640.00
The weight of a 4 x 8 piece of slate can vary depending on its thickness and density, but on average, slate weighs about 12 to 15 pounds per square foot. Therefore, a 4 x 8 piece, which is 32 square feet, would typically weigh between 384 to 480 pounds. Always check specific slate specifications for a more accurate weight.
It will cost about $550 to remove a non load bearing wall by a contractor. That amount is for a wall that is about 10 feet long and 8 feet high.
To cover a length of 22 feet, you need to purchase 8 yards of border, since 1 yard equals 3 feet, and 22 feet divided by 3 feet per yard equals approximately 7.33 yards (rounded up to 8 yards for whole numbers). At a cost of $8.75 per yard, the total cost for 8 yards would be 8 yards x $8.75 = $70.00.
The floor area to be tiled is 8 feet by 15 feet, which equals 120 square feet. Since each box covers 16 square feet, you will need 120/16 = 7.5 boxes of tiles. Since you can't buy half a box, round up to 8 boxes for 128 square feet, which will cost 8 * $48 = $384.
26246.7 feet
8 cubit feet = 12 square feet.
8,17 feet(8 feet, 2 inches)(8 1/6 feet)
I am wanting to build a room using cobalt. That has walls that are 2 feet thick by 8 feet tall by 24feet long by thirty feet wide. I am wanting to get an estimate. On what it will cost.
8 meters is 26 feet and 2.96 inches.
This would be around $100 for any 1 inch slate set. Used pool table slate has very little value. It can only be used on a table designed for slate and slate doesn't "go bad". Therefore, there is no market to sell used pool table slate. The potential buyer would be the small retailer, who could then replace slate damaged in handling - and it would be necessary to have a full set of matched pieces to sell it.