More information is needed. The plank has a length, width and height and you only gave 2 dimensions. Also we would need something like the density of the plank.
Your answer depends on the wood -- some wood is heavier than other wood; whether the door is fashioned in some way with mouldings; whether or not the door is hollow or solid, and so forth.
6
It depends on the variety of the wood, whether is is seasoned and dry. From 170 kg per cubic metre for Balsa to 1370 kg per cubic metre for Lignum Vitae
1 ton
It depends, how much does dan weigh?
To cook a delicious wood plank salmon in the oven, preheat the oven to 400F. Soak a cedar plank in water for at least 1 hour. Place the salmon fillet on the soaked plank, season with salt, pepper, and herbs. Bake in the oven for about 15-20 minutes or until the salmon is cooked through. Enjoy your flavorful wood plank salmon!
A wood chip typically weighs between 0.5 to 1 gram, depending on its size and moisture content.
The weight of a wood dowel rod can vary depending on its diameter and length. As a rough estimate, a 1-inch diameter wood dowel rod that is 36 inches long can weigh around 0.5 pounds. It's best to weigh the specific rod you have for an accurate measurement.
If the plank is cut into eight equal parts then divide eight into 1 foot to get the length of one part. 1 ÷ 8 = 1/8foot. So one part is one-eighth of a foot long. Two parts therefore measure twice that length. 2 x 1/8 = 2/8 foot. But, two divides into both the numerator and denominator so the fraction can be simplified 2 ÷ 2 = 1 and 8 ÷ 2 = 4. 2/8 = 1/4 foot. The fraction that names 2 pieces of the plank of wood is 1/4 or one-quarter.
The weight of 1 cubic meter of timber wood can vary depending on the type of wood, moisture content, and density. However, on average, 1 cubic meter of timber wood weighs around 700 to 900 kg.
31,000 Coins 12 Wood Plank 15 Stone Bricks 1 Leather Apron 1 Candle
Depends very much on who makes it and for what purpose. From what I see in western Canada our medium composite wood weighs about 4 -5 pounds per board foot ( 12 x 12 x 1)
Depends very much on who makes it and for what purpose. From what I see in western Canada our medium composite wood weighs about 4 -5 pounds per board foot ( 12 x 12 x 1)
Your answer depends on the wood -- some wood is heavier than other wood; whether the door is fashioned in some way with mouldings; whether or not the door is hollow or solid, and so forth.
A 1 inch cube made of high-density material like steel or lead would weigh approximately 0.3 pounds (4.8 ounces). However, if the material is low-density like balsa wood or foam, it would weigh significantly less.
They weigh about 1 ounce !
6