0.8661 inch
08661 inch (22mm)
In the USA, 15mm is half-inch, and 22mm is three-quarters inch. Lengths of pipe nipples in these sizes range from one and a quarter/one and a half, to six inches, in half-inch increments.
A 22mm button is approximately 0.87 inches in diameter, since 1 inch equals 25.4mm. To convert millimeters to inches, you divide the millimeter measurement by 25.4. Therefore, 22mm divided by 25.4 gives you about 0.866 inches.
The recommended diameter is 22mm or 3 quarters of an inch.
There are 10mm in 1cm so, 22mm = 2.2cm
An olive is a compression fitting used in plumbing. you would use a 22mm olive. you would use t in conjunction with a 22mm compresion fitting Before you use a 22mm olive make sure the pipe you are using the 22m fitting on IS 22mm and NOT 3/4. If it is 3/4 then you need a 3/4 olive from your merchants but they fit inside a 22mm compression fitting.
No- with the possible exception of some primitive muzzleloading hand cannon. That would fire a bullet nearly an inch in diameter- bigger than a 12 g shotgun slug.
2.2 cm
0,86 inches
22mm diameter deformed bars unit weight kilogram per meter
6 cm
22mm = 2.2cm