0
Technically, none. A square foot is a measure of area whereas it is the volume of water that is required. To convert from area to volume it is necessary to know the depth.
A twelfth of a cubic foot will cover an area of one square foot to a depth of 1 inch. A cubic foot will cover it to a depth of 1 foot, 100 cubic feet will cover it to a depth of 100 feet.
What else can I help you with?
How much water does a square foot hold?
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
How much is 1 square foot in square meters?
! Square foot = 0.092903 square meters.
How much pressure does one square foot of water exert?
One square foot of water exerts a pressure of approximately 62.4 pounds per square foot at sea level. This is based on the weight of water, which is about 62.4 pounds per cubic foot. The pressure exerted increases with depth, following the principle that pressure is equal to the weight of the water column above the area.
How much can a square foot equal to a cubic foot?
You can not compare a square foot to a cubic foot because they are 2 different quantities!
How much water does a 18 foot by 36 foot pool hold?
There is not enough information. What is the height of the pool? The pool area is 648 square feet.
How much water fills in a square of side 10 meter?
A square is a plane figure with no volume.
How much water does a square foot hold?
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
How much water is in a square of 1 foot?
A square foot cannot hold water its 2 dimensional. What you see is what you get . A one cubic foot container can hold 7.48 US gallons of liquid.
How much in ounces is 1 square foot of water?
1 ounce.
How much water is needed to cover an area of 1 square foot with 1 2 inch of water?
To cover an area of 1 square foot with 1/2 inch of water, you would need 0.623 gallons of water.
How much is 1 square foot in square meters?
! Square foot = 0.092903 square meters.
How much pressure does one square foot of water exert?
One square foot of water exerts a pressure of approximately 62.4 pounds per square foot at sea level. This is based on the weight of water, which is about 62.4 pounds per cubic foot. The pressure exerted increases with depth, following the principle that pressure is equal to the weight of the water column above the area.
How much water fills a bathtub?
30 gallons
How much weight per square foot can plexiglass up-hold depending on its thickness?
A square foot of Plexiglas can hold no water. It is a flat sheet. A cube of Plexiglas would be needed.
How much can a square foot equal to a cubic foot?
You can not compare a square foot to a cubic foot because they are 2 different quantities!
How much water does a 18 foot by 36 foot pool hold?
There is not enough information. What is the height of the pool? The pool area is 648 square feet.
Which is bigger 20 square inches or 1 square foot?
One square foot is 144 square inches. So 20 square inches is much smaller.
