2.75 Imperial gallons.
It holds 702 cubic feet.
A standard 50-foot garden hose with a diameter of about 5/8 inch can hold approximately 9-10 gallons of water when fully filled. This volume may vary slightly depending on the hose's diameter and design. Generally, the larger the diameter, the more water it can hold.
1 Gallon
To determine how much water a 6-inch pipe can hold, you need to calculate its volume based on its length. The volume (in gallons) can be found using the formula for the volume of a cylinder: ( V = \pi r^2 h ), where ( r ) is the radius (3 inches for a 6-inch pipe) and ( h ) is the length of the pipe in inches. For example, a 10-foot (120-inch) length of a 6-inch pipe would hold about 18.9 gallons of water.
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
16foot
A 24-inch diameter cylinder holds 23.5 gallons of water per foot of length/height.
It holds 702 cubic feet.
A two inch pipe can hold 0.1632 gallons per foot. It takes slightly over 6 feet of two inch pipe to hold one gallon of water.
1 and 1/2 gallons
A 5-inch pipe will hold approximately 0.36 gallons of water per linear foot. This calculation is based on the formula for calculating the volume of a cylinder (V = πr^2h), where the radius (r) is half the diameter of the pipe (2.5 inches) and the height (h) is 1 foot.
About 0.35 cubic feet or about 2.6 gallons.
A 100-foot hose with an inside diameter of five inches can hold 102 US gallons of water.
A standard 50-foot garden hose with a diameter of about 5/8 inch can hold approximately 9-10 gallons of water when fully filled. This volume may vary slightly depending on the hose's diameter and design. Generally, the larger the diameter, the more water it can hold.
1 Gallon
To determine how much water a 6-inch pipe can hold, you need to calculate its volume based on its length. The volume (in gallons) can be found using the formula for the volume of a cylinder: ( V = \pi r^2 h ), where ( r ) is the radius (3 inches for a 6-inch pipe) and ( h ) is the length of the pipe in inches. For example, a 10-foot (120-inch) length of a 6-inch pipe would hold about 18.9 gallons of water.
To calculate the volume of water a 36-inch pipe can hold per foot, first find the cross-sectional area using the formula for the area of a circle, (A = \pi r^2). The radius of a 36-inch pipe is 18 inches (or 1.5 feet). Therefore, the area is approximately (A = \pi (1.5)^2 \approx 7.07) square feet. Since the volume per foot is the area times the length (1 foot), the pipe will hold approximately 7.07 cubic feet of water per foot.