0
What else can I help you with?
How much dirt to fill a round hole 18 feet in diameter and 18 inches deep?
cylinder 18 feet diameter x 1.5 feet deep volume = 381 cubic feet
How many gallons of water will it take to fill a 12 inch diameter cylinder 10 feet long?
To answer this question, you can calculate the volume of the cylinder in cubic inches, then use the fact that a gallon is 231 cubic inches to convert to gallons. Cylinder volume is the cylinder base area (the circle that is 12 inches in diameter) times the height. Cylinder base area: 12 inch diameter, using pi x r2 = 3.14159 x 62 = 113 in2. Cylinder volume: 113 in2 x 10 ft x 12 in/ft = 13560 in3. Conversion to gallons: 13560 in3 (divided by) 231 in3/gallon = 58.7 gallons.
If A circular pool has a diameter of 15 feet Approximately how many cubic feet of water are required to fill the pool to a depth of 6 feet?
The formula for the volume of a cylinder isV = πr2h where r is the radius of the base and h is the height.Thus, the volume of water needed to fill said cylindrical pool to a depth of 6 feet would beV = π(7.5)2(6)V = 337.5π which approximately equals 1059.75 cubic feet.
How do I find the volume of an irregular object using a graduated cylinder?
To find the volume of an irregular object using a graduated cylinder, you can use the method of water displacement. Fill the graduated cylinder with a known volume of water, then carefully submerge the irregular object in the water. The increase in water level corresponds to the volume of the object. Subtract the initial volume from the final volume to determine the volume of the irregular object.
What is the volume cylinder if its diameter is equals to its height?
volume of cylinder = pi r2 h so if h = d, h = 2r so v= pi r2 2r depends on the lengths now just fill in the equation
How many gallons of water will it take to fill a cylinder that is 15 inches in diameter and 556 feet long?
It will take 5,104.1 gallons of water to fill this cylinder.
How many gallons of water will it take to fill a 12 inch diameter cylinder 104702 feet long?
615,142 gallons of water are needed to fill this cylinder.
How many cubic feet of dirt will it take to fill a 3'x3' cylinder?
Assuming the cylinder's diameter is 3', it will take 21.2 cubic feet.
Which tool would yo use to measure the capacity of a container?
You would use a measuring cup or a graduated cylinder to measure the capacity of a container. Fill the container with water and then pour the water into the measuring cup or graduated cylinder to determine its volume.
Why can use not fill a cylinder with gas?
You can fill a cylinder with gas.
How much sand to fill a cylinder 30 inches in diameter by 72 inches deep?
29.45 cubic feet or 183.45 US gallons.
If you had a bucket with a diameter of 10 inches and a glass with a diameter of 1 inch and put both out in the rain which one would fill quicker?
The bucket with the larger diameter would fill quicker than the glass with the smaller diameter because it has a greater area to collect rainwater. The rain would accumulate in the bucket faster due to its larger surface area compared to the glass.
What happens to the retraction speed of a cylinder rod if the diameter of the rod is increased but the oil flow to the cylinder stays the same?
If the diameter of the rod is increased but the oil flow remains the same, the retraction speed of the cylinder rod will decrease. This is because a larger diameter rod requires more volume of oil to fill, resulting in slower movement when the same amount of oil is flowing through.
How many drops of water does it take to fill a small graduated cylinder to the 1 milliliter mark?
It can vary depending on the size of the drops, but typically it would take around 20-25 drops of water to fill a small graduated cylinder to the 1 milliliter mark.
How much dirt to fill a round hole 18 feet in diameter and 18 inches deep?
cylinder 18 feet diameter x 1.5 feet deep volume = 381 cubic feet
How do you find the volume of bottle?
A label on a bottle bought in a shop would show the volume. If there is no label, fill the bottle with water to the top, then empty the water into a measuring jar or cylinder. The volume is then read off the scale marked on the measuring jar or cylinder.
How many gallons of water will it take to fill a 12 inch diameter cylinder 10 feet long?
To answer this question, you can calculate the volume of the cylinder in cubic inches, then use the fact that a gallon is 231 cubic inches to convert to gallons. Cylinder volume is the cylinder base area (the circle that is 12 inches in diameter) times the height. Cylinder base area: 12 inch diameter, using pi x r2 = 3.14159 x 62 = 113 in2. Cylinder volume: 113 in2 x 10 ft x 12 in/ft = 13560 in3. Conversion to gallons: 13560 in3 (divided by) 231 in3/gallon = 58.7 gallons.
