0
How much work is necessary to compress air in an insulated cylinder isentropic process from 0.20m3 to 0.01m3 use the T1 equals 2000C and P1 equals 1000kpa?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What do you call a long cylinder?
A cylinder? A cylinder is still a cylinder regardless of how long it is.
Which characteristic do a cylinder and a sphere NOT have in common?
A cylinder has a plane face.A cylinder has a plane face.A cylinder has a plane face.A cylinder has a plane face.
What is the height of a cylinder with a surface area of 1017.36?
There is insufficient information for us to answer this question. Please edit the question to include more context or relevant information. It is necessary to know - or be able to derive - the radius.
Objects that has a cylinder shape?
Is a cylinder!
How would you find the surface area of a cylinder with a cylinder bored out of it?
if the cylinder is on the inside, it would not affect the surface area. otherwise, subtract the part of the inside cylinder that touches the outside from the cylinder
Does the slave cylinder on a 2001 ford ranger compress in or screw in?
If you are talking about the line it compresses in.
Is it required or necessary to disconnect emergency brake cable to replace rear brake pads on 2006 ford freestyle?
No, but you do need a special tool to compress the brake cylinder. Auto parts stores loan them for free with about a 30 dollar deposit
How do you use a C clamp to compress the piston?
You dont compress a piston with a C clamp, you use a piston ring compressor to compress the rings and tap the top with a hammer to sit it back in to the cylinder bore. The C clamp is used for compressing valve springs. *AArOn*
How does a pneumatic cylinder work?
penumatic cylinder work by compressed air that a comressor compress air in a closed cylinder which ther is no way air to get out exept it bush piston which is instaled transition fit with cylinder and in return path we use spring or compressed air
How much pressure will compressed CO2 create when released in an air cylinder?
Whatever amount of pressure was used to compress the CO2 originally, can be reached (or nearly reached) when it is released into an air cylinder.
How do you compress rear brake cylinder in a 1993 Honda Accord Wagon Ex?
You need to rotate the piston counter clockwise.
How to compress rear brake cylinder on a 2003 ford mustang?
I have a 01 Volvo and I had the same problem trying to compress the rear brake cyinder. Turns out that a car that has 4 wheel disc brakes, the cylinder screws in. You have to buy a universal tool from the auto parts store and it will go in enough to replace the brake pads..
How to compress the front brake cylinder on the caliper on a 1992 olds cierra?
Shade tree mechanics (such as I) use a "C" Clamp to compress it. For lack of a "C" Clamp, a large pair of channel lock pliers will also work.
What is locks?
That is when a cylinder fills with liquid and will not move. Liquids will not compress like air so it will stop the piston and usually damage the engine
Rear disc brakes on 2006 ford 500 is tool required to compress brake cylinder?
Yes, a tool is required to compress the cylinder piston on the rear brakes of a Ford Five Hundred. Drivers side turns clockwise, passenger side counterclockwise. The tool is inexpensive and can be purchased at your local parts store. Type your answer here...
You can't compress the piston on your 1992 olds Cutlass S?
AnswerThere is not enough information in your question. A cylinder piston you do not compress, you compress the rings in the piston. There are pistons in the brake system. There is no way of knowing the problem without being more specific.I'm assuming you mean the caliper piston. If it can't be compressed, replace the caliper.
Do you have to bleed brakes when you change them. we just changed our rotors and pads in 93 ford ranger and now it is grinding?
It isn't necessary unless someone steps on your brake pedal and pushes the cylinders out. If you compress your brake pad cylinder back in and you do not see any leaks then you are probably ok and are good to go...
