That depends on what bills you are using.
Each bill is .0043 inches thick. 2000 dollars in twenties, which is 100 bills, is only .43 inches thick.
A standard penny is about 1.52 millimeters thick. To make a foot, which is 12 inches or 304.8 millimeters, you would need approximately 200 pennies stacked on top of each other (304.8 mm divided by 1.52 mm per penny). So, around 200 pennies will make a stack that reaches one foot high.
A stack of 100 U.S. dollar bills is approximately 0.43 inches (about 1.1 centimeters) thick. This measurement can vary slightly based on the condition and the way the bills are stacked. Generally, each bill is about 0.0043 inches thick, so multiplying that by 100 gives you the total thickness.
Back in the late 1970s I actually saw a hundred thousand dollar bill. If they still made them our stack would not be that high even for a trillion dollars since it would only take ten million of them to make a trillion dollars. But even that stack would be a sight to behold. But they stopped making that domination of bill back in the mid 1960s, 1964 I think. On our way to how high the stack would be in 100 dollars bills for the trillion dollars, most paper money (though it is not made out of paper these days), is .0043 inches thick, so one trillion in 100s would be a stack that contains 10 billion bills. The stack would be 678 MILES thick/high. It works out something like this: 10,000,000,000 times .0043 equals 43,000,000 inches which equals 3,583,333 feet which equals 678.66 MILES. If it was 50s the stack would be twice as high or 1357.32 MILES. If its 20s the stack would be 3393.30 MILES high. In 10s it would be twice as high as the previous or 6786.60 MILES and in one dollar bills it would be ten times higher or 67866 Miles high. So in Ben Franklins the stack would be 100 times smaller 678.66 Miles high. That amount in the value of the National Debt would be a stack 10179.92 MILES high. All figures are rounded to the second decimal point.
1303 Nickels stacked up would be roughly 100 inches. A nickel is 1.95mm thick which is 0.07677165 inches thick.
Stacked fibers formed into a soft sheet
310m
The distance to the moon is approximately 238,855 miles. If you stacked pennies on top of each other, a single penny is about 0.06 inches thick. You would need roughly 477,710,000 pennies stacked on top of each other to reach the moon.
Three nickels stacked together would be approximately 6.4 millimeters tall. Each nickel is about 1.95 millimeters thick.
It is 0.19685 inches. That is a little less than the thickness of two nickels and a dime stacked together. If you prefer the Euro, it is a little more than two 2-Euro coins stacked on top of each other.
Each bill is .0043 inches thick. 2000 dollars in twenties, which is 100 bills, is only .43 inches thick.
It's so thin that it would take 200 of them, stacked up, to have a thickness of 1.0mm .
Assuming a standard sheet of paper is 0.1mm thick, the height of a million sheets of paper stacked on top of each other would be 100 meters (328 feet).
25
The US quarter is 1.75 mm thick. One million of them stacked would be 1,750,000 mm high (or 17,500.00 cm, or 175 meters). In inches and feet, the quarter being .069 inches thick, one million stacked would be 69,000 inches, or 5,750 feet, or 1 mile and 156.6 yards.
A U.S. minted 0.25 cent piece is 1/16th of an inch thick. So 16.
Apply a 1/2" thick coat of morter to your wall and a 1/4" thick to the back of your stone for a proper installsource: http://www.fauxpanels.com/install.php