Want this question answered?
density = mass/volume
The shape of an object is not enough to calculate its density. You also need its mass and then Density = Mass/Volume.
Bulk density = dry weight / volume, then by knowing the dry weight and bulk density we can calculate the volume.
Density is found when you divide the mass and the volume.
calculate density of sponge ?
To calculate the weight of particle board, you will need to know the dimensions (length, width, thickness) and the density of the particle board. Simply multiply the volume (length × width × thickness) by the density to determine the weight of the particle board.
Plywood Laminated veneer lumber Particle board Medium density fiberboard High density fiberboard
Yes. Particle board can be painted.
Yes, soil texture can influence particle density. Soil particles in sandy soils are larger and less tightly packed, resulting in lower particle density. In contrast, clay soils have smaller particles that are more closely packed, leading to higher particle density.
Particle density refers to the number of particles present in a given volume of space. It is a measure of how closely packed particles are within a material or substance. Particle density is usually expressed in terms of particles per unit volume.
The density of the wooden board is 0.8 g/cm^3. You calculate density by dividing the mass (400 g) by the volume (500 cm^3). So, density = mass/volume = 400g/500cm^3 = 0.8g/cm^3.
If you were to graph particle size and porosity, it would be a constant slope (horizontal line).Porosity is not affected by particle size.
Particle Board can be found at your local hardware store. It is mainly used for dhrlving, tops and sides.
You cannot sand and finish particle board floors with polyurethane. Particle board does not have a finish that would allow any liquid to be put on it. It would disintegrate. Particle board is not a good flooring material.
A high-density spherical particle will sink through water faster than a low-density spherical particle of the same size due to the difference in their densities. The high-density particle experiences a greater gravitational force pulling it downwards, leading to faster sinking through the water.
sawdust
The density of medium density fiberboard typically ranges from 600 kg/m3 to 800 kg/m3, depending on the manufacturer and specific product.