0
Add your answer:
Earn +20 pts
What is the 44th digit of e pi?
9
Who is Barack King James bible?
Barak is the son of Abinoam,He led an army to fight with Sisera,the canaanites who oppre.ssed the israelites .The deliverance of Israel from canaanites was a success together with deborah the priestess.
What is 7 8/17 rounded to the nearest whole number?
Unified Handicap System) just use the allocated handicap rounded to the nearest whole number. Contrary to popular opinion, a player's handicap is intended to reflect a player's potential or "average best", not a player's overall average score. Statistically, low handicappers will play to their handicap more often because they are likely to be more consistent than higher handicappers. The total number of strokes taken for a hole (or round) before accounting for a golfer's handicap is called the gross score for that hole (or round), and the number of strokes taken after subtracting any handicap allowance is called the net score.In handicap stroke play competitions, a golfer's playing handicap is subtracted from the total number of strokes taken to produce a net score, which is then used to determine the final results. In handicap Stableford competitions, a player's handicap is distributed according to predetermined hole ratings (stroke index) and strokes deducted accordingly from each hole score before calculating the points for that hole. In match play, the handicap difference between players (or teams) is used to determine the number of strokes the high handicap player should receive from the low handicapper during the playing of their round; each of these strokes are received on the lowest numbered stroke index holes. Stroke allowances may sometimes be reduced by a set percentage in order to maintain the level playing field; this is especially common in pairs and team competitions. Course Rating, (Standard) Scratch Score, Scratch Rating, and Standard Rating are largely equivalent ratings that are used to indicate the average "good score" by a scratch golfer for a set of tees on a golf course. For a par 72 course, the course rating is generally between 67 and 77. There are different methods of calculating the Course Rating, with the length of the course and its obstacles being the biggest factors. Some systems use only these two, or even length alone, but most modern handicapping systems now use the USGA Course Rating system which assesses the difficulty of all aspects of the course, e.g. altitude, wide or narrow fairways, length of any rough, the size and contours of the greens, etc.Some handicapping systems provide for an adjustment to the course rating to account for variations in playing conditions on any given day, e.g. course setup and weather, and it is against this adjusted rating that handicaps are assessed and maintained. Examples of adjusted ratings are Playing Conditions Calculation (World Handicap System), Competition Scratch Score (CONGU Unified Handicapping System), Daily Scratch Rating (Golf Australia Handicap System), and Calculated Rating (South African Handicap System). Analogous to course rating is the bogey rating, which is a measure of the playing difficulty of a course for a bogey golfer. Devised by the USGA, the Slope Rating of a golf course describes the relative difficulty of a course for a bogey golfer compared to a scratch golfer. Slope Ratings are in the range 55 to 155, with a course of standard relative difficulty having a rating of 113; the higher the number, the more relatively difficult the course is. In most major handicapping systems, a golfer does not use their exact handicap (or handicap index) directly, but use it to produce their playing or course handicap. For some systems, this means simply rounding the exact handicap to the nearest whole number; however, systems that use slope ratings require a more complex calculation to produce a course handicap with some also factoring in the course rating: Course handicap = ( handicap index × slope rating ) 113 {\displaystyle {\mbox{Course handicap}}={\frac {({\mbox{handicap index}}\times {\mbox{slope rating}})}{\mbox{113}}}} or Course handicap = ( handicap index × slope rating ) 113 + ( course rating − par ) {\displaystyle {\mbox{Course handicap}}={\frac {({\mbox{handicap index}}\times {\mbox{slope rating}})}{\mbox{113}}}+({\mbox{course rating}}-{\mbox{par}})} The USGA and Golf Australia systems use the first calculation; the WHS, EGA, and Golf RSA systems use the second. Under CONGU's Unified Handicapping System the exact handicap is rounded to the nearest whole number to produce the playing handicap, and in the Argentinian system the exact handicap is used directly. A playing handicap may also refer to the stroke allowance for a given competition dependent on playing format, and is generally calculated as a percentage of the course handicap. The Stroke Index is a number that has been assigned to each hole on a golf course, and usually printed on the scorecard, to indicate on which holes handicap strokes should be applied. On an 18-hole course, each hole is assigned a different number from 1 to 18 (1 to 9 on a 9-hole course). The lowest numbers are usually given to the holes where a higher handicapper is most likely to benefit, and the highest numbers to the holes they are least likely to benefit. Odd numbers will be allocated to either the first or second 9-holes (and even numbers to the other) to ensure a balanced distribution of handicap strokes, and guidelines generally recommend avoiding having the lowest numbers at the start or end of each nine in order to prevent early stroke allowances in playoffs between golfers with similar handicaps or strokes going unused if they are at the end. Most of the commonly used handicap systems seek to reduce the impact of very high scores on one or more individual holes on the calculation and updating of handicaps. This is achieved by setting a maximum score on each hole, which is only used for handicapping purposes; i.e. it is not used for determining results of competitions or matches. This maximum hole score is either a fixed number or a net score relative to par. Equitable Stroke Control (ESC) and net double bogey (also called Stableford Points Adjustments) are the two most common mechanisms for defining a maximum hole score. Handicap (or score) differentials are a feature of many handicapping systems. They are a standardized measure of a golfers performance, adjusted to take account of the course being played. Normally the overall score will be adjusted prior to the calculation, e.g. by means of ESC or net double bogey. The course rating may also be adjusted to take account of conditions on the day. For handicapping systems that use course and slope ratings, a typical calculation is as follows: Handicap differential = ( adjusted score − course rating ) × 113 slope rating {\displaystyle {\mbox{Handicap differential}}={\frac {({\mbox{adjusted score}}-{\mbox{course rating}})\times {\mbox{113}}}{\mbox{slope rating}}}} The differentials are used both to calculate initial handicaps and maintain existing ones, by taking a mean average of a set number of the best recent differentials (e.g. the USGA system uses the best 10 differentials from the last 20 scores). For other handicapping systems, the differentials are simply the difference between the (adjusted) gross or net scores and a specified standard rating (e.g. course rating, standard scratch score, etc.), and they are used in different ways to maintain handicaps. In golf clubs, peer review is usually managed by an elected Handicap Secretary who, supported by a small committee, conducts an Annual Review of the handicaps of all members and assesses ad hoc requests from individual members (usually when age or medium to long-term infirmity affects their playing ability). This gives uniformity to handicapping across their club for the setting and maintenance of handicaps with the objective of establishing fair competition between golfers of all abilities. At the regional level, peer review is extended to include rigorous validation of the handicap returns of low handicap golfers. This ensures that only golfers of an appropriate standard gain entry to their elite tournaments. Occasionally, golfers are excluded from the elite game as a consequence of being found to abuse the system. To a degree, these regional bodies also monitor the performance of and provide training for Handicap Secretaries at the club level. Nationally, the peer review is extended further to assessing golfers from external jurisdictions for their suitability for entry into their elite international events. They also play a large part in periodic reviews of the handicapping system itself to improve it for the future. Due to the many different handicapping systems in use around the world, and the many inconsistencies within them, which makes it difficult to compete on an equal footing where another handicap system is in use, the sports major governing bodies, in 2011 The R&A and the USGA began work on creation of a single uniform handicapping system to be used everywhere. In February 2018, they announced that the World Handicap System (WHS) would be launched in 2020. Once introduced, the World Handicap System will continue to be governed by The R&A and the USGA with the six existing major handicapping authorities (the USGA, the Council of National Golf Unions (CONGU) in Great Britain and Ireland, the European Golf Association (EGA), Golf Australia, the South African Golf Association (SAGA), and the Argentine Golf Association (AAG)) administering the system at a local level.The WHS is based on the USGA Course and Slope Rating system, and largely follows the USGA Handicap System while also incorporating features from the six major existing handicap systems. For example, 8 differentials (like the Golf Australia system) are used after net double bogey adjustments (like the CONGU and EGA systems) for handicap calculations, and the WHS course/playing handicap includes a course rating adjustment (like the EGA system). For players with current handicaps, their handicap records in the old systems will be used to produce WHS handicaps; the expectation is that most players will at most see a difference of one or two strokes, if any. A new WHS handicap requires several scores to be submitted; the recommendation is a minimum of 54 holes made up of any number of 9 or 18-hole rounds in order to achieve a reasonable fair and accurate result, although handicaps may be issued from a smaller sample. Handicap adjustments will be made upon submission of any 9 or 18-hole scores with updates published daily; unlike some other systems both competitive and recreational rounds may be submitted by all players (e.g. CONGU's Unified Handicapping System only allows submission of non-qualifying scores by golfers in Category 2 or above). Ongoing handicaps are based on the average of the best 8 differentials, but with an "anchor" to prevent rapid increases that would not necessarily reflect the players true potential. There is also a hole limit of "net double bogey" for handicapping purposes in order to prevent one or two bad holes from having a disproportionate effect. World Handicap System overview A WHS handicap is calculated with a specific arithmetic formula that approximates how many strokes above or below par a player might be able to play, based on the eight best scores of their last twenty rounds. The calculation has several variables: the player's scores from their most recent rounds, and the course and slope ratings from those rounds. A score differential is calculated from each of the scores after any net double bogey adjustments (an adjustment which allows for a maximum number of strokes per hole based on the player's course handicap) have been applied, using the following formula: 18-hole score differential = 113 slope rating × ( adjusted score − course rating − PCC adjustment ) {\displaystyle {\mbox{18-hole score differential}}={\frac {\mbox{113}}{\mbox{slope rating}}}\times ({\mbox{adjusted score}}-{\mbox{course rating}}-{\mbox{PCC adjustment}})} 9-hole score differential = 113 slope rating × ( adjusted score − course rating − ( 0.5 × PCC adjustment ) ) {\displaystyle {\mbox{9-hole score differential}}={\frac {\mbox{113}}{\mbox{slope rating}}}\times ({\mbox{adjusted score}}-{\mbox{course rating}}-({\mbox{0.5}}\times {\mbox{PCC adjustment}}))} Only 18-hole differentials are used for the calculation of a handicap index. As such, 9-hole differentials need to be combined before being used, subject to remaining one of the 20 most recent differentials. The system also allows for situations where less than 18 (or 9) hole have been played, subject to a minimum of 14 (or 7) holes having been completed, by "scaling up" with net pars for any missing holes. The score differentials are rounded to one decimal place, and the best 8 from the last 20 submitted scores are then averaged and rounded to one decimal place to produce the handicap index. Initial handicaps are calculated from a minimum of five scores using adjustments that limit each hole score to a maximum of ( par + 5 ) {\displaystyle ({\mbox{par}}+{\mbox{5}})} . If there are at least 5 but fewer than 20 qualifying scores available, the handicap index is calculated using a set number or differentials according to how many scores are available, with an additional adjustment made to that average in some circumstances. The basic formula for calculating the handicap index is as follows (where n {\displaystyle n} is the number of differentials to use), with the result rounded to one decimal place: Handicap index = 1 n ∑ x = 1 n Differential x + adjustment {\displaystyle {\mbox{Handicap index}}={\frac {1}{n}}\sum {x=1}^{n}{\mbox{Differential}}{x}+{\mbox{adjustment}}} The handicap index is not used directly for playing purposes, but used to calculate a course handicap according to the slope rating of the set of tees being used with an adjustment based on the difference between the course rating and par. The result is rounded to the nearest whole number. For competitions, the unrounded course handicap is converted to a playing handicap by applying a handicap allowance, dependent on the format of play. Course Handicap = ( Handicap index × Slope Rating ) 113 + ( course rating − par ) {\displaystyle {\mbox{Course Handicap}}={\frac {({\mbox{Handicap index}}\times {\mbox{Slope Rating}})}{113}}+({\mbox{course rating}}-{\mbox{par}})} The WHS contains measures reduce a handicap index more quickly in the case of exceptional scoring, and also to prevent a handicap index from rising too quickly. This is done by means of "soft" and "hard" caps based on the lowest index during the previous 365 days; the soft cap reduces increases above 3.0 to 50%, and the hard cap limits increases to 5.0. Updates to a golfer's handicap index are issued daily. Many elements of WHS have flexibility which allows for local authorities to determine their own settings, but the basic handicap index calculation remains the same. Examples include: 9-hole scores may be scaled-up rather than combined; ( course rating − par ) {\displaystyle ({\mbox{course rating}}-{\mbox{par}})} may be omitted from the course handicap calculation; and the rounded course handicap may be used in the playing handicap calculation. The first handicap system to be introduced by the USGA was largely the work of Leighton Calkins, who based it on the British "three score average" system where the handicap was calculated as the average of the best three scores to par in the last year. The key difference was the introduction of a par rating (later known as course rating), which was based on the ability of leading amateur Jerome Travers, to account for variances in the playing difficulty of different courses. After initially allowing clubs to determine their own ratings, at the behest of Calkins the USGA quickly began assigning ratings centrally. Course ratings were rounded to the nearest whole number until 1967, when they started being given to one decimal place.In 1947, the number of scores used to calculate handicaps was increased to the best 10 from all scores ever recorded subject to a minimum of 50. However this was not uniformly implemented, with regional associations disagreeing on the total number of rounds to be considered. In 1958, the USGA specified that the best 10 from 25 scores would be used. This was reduced to 10 from 20 in 1967, which remains to this day although a further adjustment was made with the introduction of a "Bonus of Excellence" multiplier to equalize handicaps and give better players a marginal advantage. Originally 85%, the multiplier was changed to 96% after being seen to favor better players too heavily. In 1974, Equitable Stroke Control was adopted in order to eliminate the effect of very high individual hole scores on handicap calculations.With the system still not accounting for variances in playing difficulty for golfers of different abilities, in 1979 the USGA set to work on how to address the issue with the creation of the Handicap Research Team. The result of their work was the creation of what is now the Slope system. Slope was gradually introduced, firstly in Colorado in 1982, before being implemented nationally from 1987. The USGA then set about making further refinements to the course rating system, which at the time was still largely dependent on length, to take account of many other factors affecting scoring ability for a scratch golfer. The USGA Course and Slope Rating system is now used by most of the world's major handicapping systems.The USGA Handicap System is used throughout the jurisdiction of the USGA (i.e. the United States and Mexico), and is also licensed for use in many other countries around the world, e.g. Canada. The USGA has often resorted to the courts to protect the integrity of its handicap system. In one such case, the California Court of Appeal (First District) summarized the system's history: The USGA was founded in 1894. One of its chief contributions to the game of golf in the United States has been its development and maintenance since 1911 of the USGA handicap system ... designed to enable individual golf players of different abilities to compete fairly with one another. Because permitting individual golfers to issue their handicaps to themselves would inevitably lead to inequities and abuse, the peer review provided by authorized golf clubs and associations has always been an essential part of the [system]. Therefore, to protect the integrity and credibility of its [handicap system], the USGA has consistently followed a policy of only permitting authorized golf associations and clubs to issue USGA handicaps ... In 1979, USGA assembled a handicap research team to investigate widespread criticisms of USGA's then-existing handicap formula. The research team invested approximately a decade and up to $2 million conducting intensive analysis and evaluation of the various factors involved in developing a more accurate and satisfactory [system]. As a result, the research team developed new handicap formulas ... designed to measure the overall difficulty of golf courses, compare individual golfers with other golfers of all abilities, take account of differences between tournament and casual play, and adjust aberrant scores on individual holes. USGA subsequently adopted and implemented these new [f]ormulas between 1987 and 1993. USGA Handicap System overview A USGA handicap is calculated with a specific arithmetic formula that approximates how many strokes above or below par a player might be able to play, based on the ten best scores of their last twenty rounds. The calculation has several variables: the player's scores from their most recent rounds, and the course and slope ratings from those rounds. A handicap differential is calculated from each of the scores after Equitable Stroke Control (ESC), an adjustment which allows for a maximum number of strokes per hole based on the player's course handicap, has been applied using the following formula: Handicap differential = ( ESC adjusted score − course rating ) × 113 slope rating {\displaystyle {\mbox{Handicap differential}}={\frac {({\mbox{ESC adjusted score}}-{\mbox{course rating}})\times {\mbox{113}}}{\mbox{slope rating}}}} The handicap differentials are rounded to one decimal place, and the best 10 from the last 20 submitted scores are then averaged, before being multiplied by 0.96 (the "bonus of excellence") and truncated to one decimal place to produce the handicap index. Initial handicaps are calculated from a minimum of five scores using ESC adjustments based on the course handicap corresponding to a handicap index of 36.4 for men or 40.4 for women. If there are at least 5 but fewer than 20 qualifying scores available, the handicap index is calculated using a set number or differentials according to how many scores are available. The basic formula for calculating the handicap index is as follows (where n {\displaystyle n} is the number of differentials to use), with the result truncated to one decimal place: Handicap index = 0.96 n ∑ x = 1 n Differential x {\displaystyle {\mbox{Handicap index}}={\frac {0.96}{n}}\sum {x=1}^{n}{\mbox{Differential}}{x}} The handicap index is not used directly for playing purposes, but used to calculate a course handicap according to the slope rating of the set of tees being used. The result is rounded to the nearest whole number. Course Handicap = ( Handicap index × Slope Rating ) 113 {\displaystyle {\mbox{Course Handicap}}={\frac {({\mbox{Handicap index}}\times {\mbox{Slope Rating}})}{113}}} Updates to a golfer's handicap index are issued periodically, generally once or twice per month depending on the local state and regional golf associations. Following a meeting of the four men's golf unions of Great Britain and Ireland in York arranged by The Royal and Ancient Golf Club of St Andrews in 1924, the British Golf Unions Joint Advisory Committee (later Council of National Golf Unions) was formed. The organization was tasked with creating a handicapping system that would be equitable to golfers of varying ability, and as a result the Standard Scratch Score and Handicapping Scheme was devised. The system was introduced in 1926, and used a "scratch score" system to rate courses, taking account that courses may play easier or more difficult than par.A new system was introduced in 1983, which incorporated features of the Australian system. This was further revised in 1989 with the introduction of the Competition Scratch Score (CSS), an adjustment to the Standard Scratch Score (SSS), to take account of variances in course conditions (setup, weather, etc.) on a given day. Further significant changes came in 1993 (buffer zones) and 1997 (Stableford Points Adjustment). In 2002, the Council of National Golf Unions (CONGU) and the Ladies' Golf Union (LGU) began working together (the LGU had adopted a system similar to that of CONGU in 1998) and in February 2004 the Unified Handicapping System (UHS) came into force.The Unified Handicapping System is used to manage handicaps for both men and women who are members of affiliated golf clubs in the United Kingdom and the Republic of Ireland. The system is published by CONGU and administered by each of the individual unions on behalf of their members, with handicaps being managed locally by someone at each club; this person normally holds the position of competitions or handicap secretary. Unified Handicapping System overview Under the Unified Handicapping System, initial handicaps are allocated based on returned scores from 54 holes, usually three 18-hole rounds. The number of strokes taken on each hole is adjusted to maximum of double the par of the hole before adding up the scores; adjustments were previously 2 over par for men and 3 over par for women. The best of the "adjusted gross differentials" (AGD) between the adjusted score and the Standard Scratch Score (SSS) is taken to calculate the initial handicap using the following formula, with the result truncated to give a whole number: Initial handicap = ( Lowest AGD + ( Lowest AGD × 0.13 ) ) 1.237 {\displaystyle {\mbox{Initial handicap}}={\frac {({\mbox{Lowest AGD}}+({\mbox{Lowest AGD}}\times {\mbox{0.13}}))}{\mbox{1.237}}}} Adjustments may be made to the initial handicap should it be deemed necessary to ensure it is reasonably fair. Handicaps are given to one decimal place and divided into categories with the lowest handicaps being in Category 1. Prior to 2018, the highest handicaps were in Category 4 for men, with a maximum of 28.0, and Category 5 for women, with a maximum of 36.0, with provision for higher "club" or "disability" handicaps up to a limit of 54.0 for those who cannot play to these lower limits. In 2018, handicap limits were standardized at 54.0 and a Category 5 was introduced for men, and a new Category 6 for all, replacing the club and disability category (see table below). The exact handicap is rounded to the nearest whole number to give the playing handicap. Many handicap competitions still have maximum limits of 28 for men and 36 for women. For all qualifying scores that are returned, adjustments are made to a players exact handicap based on the Competition Scratch Score (CSS). All hole scores are first adjusted to a maximum of net 2-over par with handicap strokes being used per the stroke index published on the scorecard; this is called Stableford or net double-bogey adjustment. Every stroke the adjusted net score is below the CSS triggers a reduction dependent on the players handicap category; for Category 1 this is 0.1 per stroke, for Category 2 it is 0.2, etc. Should the adjusted net score exceed the CSS , there is a buffer zone equivalent to the handicap category before a 0.1 increase is applied, which is the same for all categories; for Category 1 there is 1 stroke buffer, for Category 2 it is 2 strokes, etc. The Competition Scratch Score is an adjustment to the Standard Scratch Score computed from all scores returned and is in the range ( S S S − 1 ) {\displaystyle (SSS-1)} to ( S S S + 3 ) {\displaystyle (SSS+3)} with provision for "reduction only" when scoring conditions have proved especially difficult. In addition to playing in qualifying competitions, golfers in Category 2 and above may also submit a number of supplementary scores in order to maintain their handicap; primarily a feature to accommodate golfers who play in few competitions and allow them to maintain current handicaps, it is also used by people who wish to try and get their handicap down while they are playing well. There are other mechanisms in the system to reduce or increase handicaps more quickly. Every year all handicaps are reviewed and adjusted if necessary to ensure they remain fair and accurate. In addition, any very good scores are monitored throughout the year and an exceptional scoring reduction may be applied if certain triggers are reached. Historically calculating the CSS and any handicap adjustments was done manually by means of published tables, but this is now computerized with handicaps being published to a Centralised Database of Handicaps (CDH). The EGA Handicap System is the European Golf Association's method of evaluating golf abilities so that players of different standards can compete in handicap events on equal terms. It is based on Stableford scoring and has some similarities to both the CONGU system, with regards to handicap categories and adjustments, and to the USGA system, with regards to the use of course and slope ratings and calculating playing handicaps. The first version of the system was introduced in 2000. EGA Handicap System overview Under the EGA Handicap System, initial handicaps require just a single 9 or 18-hole score recorded using the maximum handicap of 54. The handicap is then calculated from the number of Stableford points scored. Initial handicap = 54 − ( Stableford points − 36 ) {\displaystyle {\mbox{Initial handicap}}={\mbox{54}}-({\mbox{Stableford points}}-{\mbox{36}})} EGA handicaps are given to one decimal place and divided into categories, with the lowest handicaps being in Category 1 and the highest in Category 6 (see table below). The handicap is not used directly for playing purposes and a calculation must be done to determine a "playing handicap" specific to the course being played and set of tees being used. For handicaps in categories 1 to 5, the formula is as follows with the result rounded to the nearest whole number: Playing handicap = ( handicap index − slope rating ) 113 + ( course rating − par ) {\displaystyle {\mbox{Playing handicap}}={\frac {({\mbox{handicap index}}-{\mbox{slope rating}})}{\mbox{113}}}+({\mbox{course rating}}-{\mbox{par}})} And for category 6 a "playing handicap differential" is used, which is equal to the playing handicap for a handicap index of 36.0: Playing handicap = ( handicap index + playing handicap differential ) {\displaystyle {\mbox{Playing handicap}}=({\mbox{handicap index}}+{\mbox{playing handicap differential}})} For all qualifying scores that are returned, adjustments are made to a players handicap index. All scores are first converted into Stableford points if necessary (i.e. rounds played using another scoring method, e.g. stroke play), effectively applying a net double bogey adjustment, and then for every point scored above the buffer zone there is a reduction applied to the players handicap index according to their handicap category; for Category 1 this is 0.1 per point, for Category 2 it is 0.2, etc. Should the number of points scored be below the buffer zone, a fixed increase of 0.1 is applied to the handicap index regardless of category. The EGA system also takes account of variations in playing difficulty on any given competition day by means of a Computed Buffer Adjustment (CBA) which adjusts the buffer zones by between −1 and +2 with provision for "reductions only" when scoring is especially difficult. The CBA replaced the previous Competition Stableford Adjustment method, which adjusted player's Stableford scores directly, in 2013. In addition to playing in qualifying competitions, golfers in Category 2 and above may also submit a number of extra day scores in order to maintain their handicap. Handicaps are also reviewed annually and any necessary adjustments made. The Golf Australia Handicap System is maintained on GOLF Link, which was a world-first computerized handicapping system developed by Golf Australia's predecessor, the Australian Golf Union (AGU) in the 1990s. When GOLF Link was first introduced it contained two key characteristics that set it apart from other world handicapping systems at the time: It used a Calculated Course Rating (CCR) to determine how difficult the course was on the day, and upon which handicap adjustment was made. It utilized a 'swipe' card that enabled a player to access his handicap from any GOLF Link terminal in Australia.In April 2010 GA adopted the USGA calculation method using the average of the best 10 differentials of the player's past 20 total rounds, multiplied by 0.96. In September 2011 this was altered to the best 8 out of 20 rounds, multiplied by 0.93. The reasons for these changes were cited to restore equity between high and low handicaps. An ‘anchor’ so that handicaps could not increase by more than 5 in a rolling 12-month period, slope ratings, and a more sophisticated version of CCR called the Daily Scratch Rating (DSR) were implemented on January 23, 2014. GA Handicap System overview The GA Handicap System is based on the Stableford scoring system, and uses slope and course rating (called "Scratch Rating"). For handicapping purposes, the scratch rating is adjusted to reflect scoring conditions ("Daily Scratch Rating"), and all scores are converted into Stableford points, called the Stableford Handicap Adjustment (SHA) and inherently applying net double bogey adjustments, regardless of the scoring system being used while playing.Handicaps are calculated from the best 8 adjusted differentials, called "sloped played to" results, from the most recent 20 scores. Should there be 3 or more but fewer than 20 scores available, a specified number of "sloped played to" results are used, per the table below. New handicaps require 3 18-hole scores to be submitted (or any combination of 9 and 18-hole scores totaling 54 holes played) using a "Temporary Daily Handicap" of 36 for men or 45 for women in order to calculate the necessary "sloped played to" results. "Sloped played to" results are calculated using the following formula and rounded to one decimal place: Sloped played to = ( Par + Daily handicap − ( Stableford points − 36 ) − Daily scratch rating ) × 113 Slope Rating {\displaystyle {\mbox{Sloped played to}}=({\mbox{Par}}+{\mbox{Daily handicap}}-({\mbox{Stableford points}}-{\mbox{36}})-{\mbox{Daily scratch rating}})\times {\frac {\mbox{113}}{\mbox{Slope Rating}}}} To calculate the GA handicap, the "sloped played to" results are averaged and multiplied by a factor of 0.93, which is intended to equalize the handicap in favor of better players. The formula for calculating a GA handicap is as follows (where n {\displaystyle n} is the number of differentials to use), with the result truncated to one decimal place: GA handicap = 0.93 n ∑ x = 1 n Sloped played to x {\displaystyle {\mbox{GA handicap}}={\frac {0.93}{n}}\sum {x=1}^{n}{\mbox{Sloped played to}}{x}} The GA handicap is used to create a "daily handicap", specific to the course and set of tees being used, using the following formula with the result rounded to the nearest whole number: Daily handicap = GA handicap × Slope Rating 113 {\displaystyle {\mbox{Daily handicap}}={\frac {{\mbox{GA handicap}}\times {\mbox{Slope Rating}}}{\mbox{113}}}} Before 2018, the South African Handicap System used a propriety course rating system without slope, called Standard Rating, which included specific calculations for length and altitude. Handicaps were calculated using the best 10 from the last 20 differentials, with differentials derived by means of a simple (Standard Rating − Adjusted Gross) formula. The system previously calculated handicaps against an adjusted Standard Rating (called Calculated Rating) but this was suspended in 2012. Playing handicaps were simply the exact handicap, rounded to the nearest whole number.In September 2018, the renamed GolfRSA Handicap System adopted the USGA Course and Slope Rating system. This necessitated a few additional changes (e.g. playing handicap and differential calculations), but the system retained all other features (e.g. Adjusted Gross and no daily course rating adjustment). The playing handicap under the GolfRSA system includes the difference between the Course Rating and Par.In October 2019, further changes were made which brought the GolfRSA Handicap System further into line with the upcoming World Handicap System. The changes introduced included reducing the number of differentials used in handicap calculations from 10 down to 8, net double bogey as the maximum score per hole, reducing the minimum number of valid 18-hole scores required for handicapping to three, and exceptional scoring reductions. The Argentine Golf Association (AAG) handicapping system is a relatively simple one, using only a course rating, without slope. New handicaps require the submission of scorecards from five 18-hole rounds (or ten 9-hole rounds). An initial handicap of 25 is normally used as a starting point, which is then adjusted based on the submitted scores. Handicaps are updated once every month, with current handicaps generated from a lookup table using the average of the best eight differentials from the last 16 rounds. Golfers simply use their exact handicap for playing purposes. For the handicapping of golfers who are ineligible for an official handicap, some system options are available: Peoria System The Peoria System was designed for the handicapping of all players competing in an event such as a charity or corporate golf day. Before play commences, the organisers secretly select 6 holes (in readiness for handicapping purposes later) from the course to be played. When players have completed their rounds, they apply the Peoria algorithm to their scores on the selected holes to determine their handicap for that round. They then subtract that handicap from their gross score to give their net score - and the winner is determined in the usual way. Callaway System The Callaway System was designed with the same objective as Peoria. The Callaway handicapping algorithm works by totaling a variable number of "worst" scores achieved (subject to a double-par limit) according to a simple table. A couple of adjustments are then made to this total to give the player's handicap, which is then applied to their gross score as normal. Scheid System The Scheid System is similar to the Callaway System, except a different version of the table is used. System 36 System 36 is a same-day handicapping system similar in function to Callaway System and Peoria System. Throughout the round, the golfer accrues points based on the following formula: Double bogey or worse: 0 points Bogey: 1 point Par or better: 2 pointsAt the end of the round, points earned are tallied. The total is subtracted from 36, and the resulting number is the golfer's handicap allowance. His net score can then be computed using his System 36 handicap allowance. World Handicap System World Handicap System – Rules of Handicapping USGA Handicap System (used in the United States and Mexico) CONGU Unified Handicapping System (used in Great Britain and Ireland) EGA Handicap System (used in continental Europe) Golf Australia Handicap System (used in Australia) South African Golf Association Handicap System (used in South Africa)This table provides a list of scientific, nationwide public opinion polls that were conducted from the 2019 Canadian federal election leading up to the 44th Canadian federal election, scheduled to take place on or before October 16, 2023. Aside from conducting the usual opinion surveys on general party preferences, polling firms also survey public opinion on who would make the best Prime Minister: A harmonic series (also overtone series) is the sequence of frequencies, musical tones, or pure tones in which each frequency is an integer multiple of a fundamental. Pitched musical instruments are often based on an acoustic resonator such as a string or a column of air, which oscillates at numerous modes simultaneously. At the frequencies of each vibrating mode, waves travel in both directions along the string or air column, reinforcing and canceling each other to form standing waves. Interaction with the surrounding air causes audible sound waves, which travel away from the instrument. Because of the typical spacing of the resonances, these frequencies are mostly limited to integer multiples, or harmonics, of the lowest frequency, and such multiples form the harmonic series (see harmonic series (mathematics)). The musical pitch of a note is usually perceived as the lowest partial present (the fundamental frequency), which may be the one created by vibration over the full length of the string or air column, or a higher harmonic chosen by the player. The musical timbre of a steady tone from such an instrument is strongly affected by the relative strength of each harmonic. A "complex tone" (the sound of a note with a timbre particular to the instrument playing the note) "can be described as a combination of many simple periodic waves (i.e., sine waves) or partials, each with its own frequency of vibration, amplitude, and phase." (See also, Fourier analysis.) A partial is any of the sine waves (or "simple tones", as Ellis calls them when translating Helmholtz) of which a complex tone is composed, not necessarily with an integer multiple of the lowest harmonic. A harmonic is any member of the harmonic series, an ideal set of frequencies that are positive integer multiples of a common fundamental frequency. The fundamental is obviously a harmonic because it is 1 times itself. A harmonic partial is any real partial component of a complex tone that matches (or nearly matches) an ideal harmonic.An inharmonic partial is any partial that does not match an ideal harmonic. Inharmonicity is a measure of the deviation of a partial from the closest ideal harmonic, typically measured in cents for each partial.Many pitched acoustic instruments are designed to have partials that are close to being whole-number ratios with very low inharmonicity; therefore, in music theory, and in instrument design, it is convenient, although not strictly accurate, to speak of the partials in those instruments' sounds as "harmonics", even though they may have some degree of inharmonicity. The piano, one of the most important instruments of western tradition, contains a certain degree of inharmonicity among the frequencies generated by each string. Other pitched instruments, especially certain percussion instruments, such as marimba, vibraphone, tubular bells, timpani, and singing bowls contain mostly inharmonic partials, yet may give the ear a good sense of pitch because of a few strong partials that resemble harmonics. Unpitched, or indefinite-pitched instruments, such as cymbals and tam-tams make sounds (produce spectra) that are rich in inharmonic partials and may give no impression of implying any particular pitch. An overtone is any partial above the lowest partial. The term overtone does not imply harmonicity or inharmonicity and has no other special meaning other than to exclude the fundamental. It is mostly the relative strength of the different overtones that give an instrument its particular timbre, tone color, or character. When writing or speaking of overtones and partials numerically, care must be taken to designate each correctly to avoid any confusion of one for the other, so the second overtone may not be the third partial, because it is the second sound in a series.Some electronic instruments, such as synthesizers, can play a pure frequency with no overtones (a sine wave). Synthesizers can also combine pure frequencies into more complex tones, such as to simulate other instruments. Certain flutes and ocarinas are very nearly without overtones. One of the simplest cases to visualise is a vibrating string, as in the illustration; the string has fixed points at each end, and each harmonic mode divides it into 1, 2, 3, 4, etc., equal-sized sections resonating at increasingly higher frequencies. Similar arguments apply to vibrating air columns in wind instruments (for example, "the French horn was originally a valveless instrument that could play only the notes of the harmonic series"), although these are complicated by having the possibility of anti-nodes (that is, the air column is closed at one end and open at the other), conical as opposed to cylindrical bores, or end-openings that run the gamut from no flare, cone flare, or exponentially shaped flares (such as in various bells). In most pitched musical instruments, the fundamental (first harmonic) is accompanied by other, higher-frequency harmonics. Thus shorter-wavelength, higher-frequency waves occur with varying prominence and give each instrument its characteristic tone quality. The fact that a string is fixed at each end means that the longest allowed wavelength on the string (which gives the fundamental frequency) is twice the length of the string (one round trip, with a half cycle fitting between the nodes at the two ends). Other allowed wavelengths are 1⁄2, 1⁄3, 1⁄4, 1⁄5, 1⁄6, etc. times that of the fundamental. Theoretically, these shorter wavelengths correspond to vibrations at frequencies that are 2, 3, 4, 5, 6, etc., times the fundamental frequency. Physical characteristics of the vibrating medium and/or the resonator it vibrates against often alter these frequencies. (See inharmonicity and stretched tuning for alterations specific to wire-stringed instruments and certain electric pianos.) However, those alterations are small, and except for precise, highly specialized tuning, it is reasonable to think of the frequencies of the harmonic series as integer multiples of the fundamental frequency. The harmonic series is an arithmetic progression (1×f, 2×f, 3×f, 4×f, 5×f, ...). In terms of frequency (measured in cycles per second, or hertz (Hz) where f is the fundamental frequency), the difference between consecutive harmonics is therefore constant and equal to the fundamental. But because human ears respond to sound nonlinearly, higher harmonics are perceived as "closer together" than lower ones. On the other hand, the octave series is a geometric progression (2×f, 4×f, 8×f, 16×f, ...), and people perceive these distances as "the same" in the sense of musical interval. In terms of what one hears, each octave in the harmonic series is divided into increasingly "smaller" and more numerous intervals. The second harmonic, whose frequency is twice the fundamental, sounds an octave higher; the third harmonic, three times the frequency of the fundamental, sounds a perfect fifth above the second harmonic. The fourth harmonic vibrates at four times the frequency of the fundamental and sounds a perfect fourth above the third harmonic (two octaves above the fundamental). Double the harmonic number means double the frequency (which sounds an octave higher). As Mersenne writes, "the order of the Consonances is natural, and ... the way we count them, starting from unity up to the number six and beyond is founded in nature." However, to quote Carl Dahlhaus, "the interval-distance of the natural-tone-row [overtones] [...], counting up to 20, includes everything from the octave to the quarter tone, (and) useful and useless musical tones. The natural-tone-row [harmonic series] justifies everything, that means, nothing." If the harmonics are octave displaced and compressed into the span of one octave, some of them are approximated by the notes of what the West has adopted as the chromatic scale based on the fundamental tone. The Western chromatic scale has been modified into twelve equal semitones, which is slightly out of tune with many of the harmonics, especially the 7th, 11th, and 13th harmonics. In the late 1930s, composer Paul Hindemith ranked musical intervals according to their relative dissonance based on these and similar harmonic relationships.Below is a comparison between the first 31 harmonics and the intervals of 12-tone equal temperament (12TET), octave displaced and compressed into the span of one octave. Tinted fields highlight differences greater than 5 cents (1⁄20th of a semitone), which is the human ear's "just noticeable difference" for notes played one after the other (smaller differences are noticeable with notes played simultaneously). The frequencies of the harmonic series, being integer multiples of the fundamental frequency, are naturally related to each other by whole-numbered ratios and small whole-numbered ratios are likely the basis of the consonance of musical intervals (see just intonation). This objective structure is augmented by psychoacoustic phenomena. For example, a perfect fifth, say 200 and 300 Hz (cycles per second), causes a listener to perceive a combination tone of 100 Hz (the difference between 300 Hz and 200 Hz); that is, an octave below the lower (actual sounding) note. This 100 Hz first-order combination tone then interacts with both notes of the interval to produce second-order combination tones of 200 (300 – 100) and 100 (200 – 100) Hz and all further nth-order combination tones are all the same, being formed from various subtraction of 100, 200, and 300. When one contrasts this with a dissonant interval such as a tritone (not tempered) with a frequency ratio of 7:5 one gets, for example, 700 – 500 = 200 (1st order combination tone) and 500 – 200 = 300 (2nd order). The rest of the combination tones are octaves of 100 Hz so the 7:5 interval actually contains 4 notes: 100 Hz (and its octaves), 300 Hz, 500 Hz and 700 Hz. Note that the lowest combination tone (100 Hz) is a 17th (2 octaves and a major third) below the lower (actual sounding) note of the tritone. All the intervals succumb to similar analysis as has been demonstrated by Paul Hindemith in his book The Craft of Musical Composition, although he rejected the use of harmonics from the 7th and beyond.The mixolydian mode is consonant with the first 10 harmonics of the harmonic series (the 11th harmonic, a tritone, is not in the mixolydian mode). The ionian mode is consonant with only the first 6 harmonics of the series (the 7th harmonic, a minor seventh, is not in the ionian mode). The relative amplitudes (strengths) of the various harmonics primarily determine the timbre of different instruments and sounds, though onset transients, formants, noises, and inharmonicities also play a role. For example, the clarinet and saxophone have similar mouthpieces and reeds, and both produce sound through resonance of air inside a chamber whose mouthpiece end is considered closed. Because the clarinet's resonator is cylindrical, the even-numbered harmonics are less present. The saxophone's resonator is conical, which allows the even-numbered harmonics to sound more strongly and thus produces a more complex tone. The inharmonic ringing of the instrument's metal resonator is even more prominent in the sounds of brass instruments. Human ears tend to group phase-coherent, harmonically-related frequency components into a single sensation. Rather than perceiving the individual partials–harmonic and inharmonic, of a musical tone, humans perceive them together as a tone color or timbre, and the overall pitch is heard as the fundamental of the harmonic series being experienced. If a sound is heard that is made up of even just a few simultaneous sine tones, and if the intervals among those tones form part of a harmonic series, the brain tends to group this input into a sensation of the pitch of the fundamental of that series, even if the fundamental is not present. Variations in the frequency of harmonics can also affect the perceived fundamental pitch. These variations, most clearly documented in the piano and other stringed instruments but also apparent in brass instruments, are caused by a combination of metal stiffness and the interaction of the vibrating air or string with the resonating body of the instrument. David Cope (1997) suggests the concept of interval strength, in which an interval's strength, consonance, or stability (see consonance and dissonance) is determined by its approximation to a lower and stronger, or higher and weaker, position in the harmonic series. See also: Lipps–Meyer law. Thus, an equal-tempered perfect fifth (play ) is stronger than an equal-tempered minor third (play ), since they approximate a just perfect fifth (play ) and just minor third (play ), respectively. The just minor third appears between harmonics 5 and 6 while the just fifth appears lower, between harmonics 2 and 3. A divisibility rule is a shorthand way of determining whether a given integer is divisible by a fixed divisor without performing the division, usually by examining its digits. Although there are divisibility tests for numbers in any radix, or base, and they are all different, this article presents rules and examples only for decimal, or base 10, numbers. Martin Gardner explained and popularized these rules in his September 1962 "Mathematical Games" column in Scientific American. The rules given below transform a given number into a generally smaller number, while preserving divisibility by the divisor of interest. Therefore, unless otherwise noted, the resulting number should be evaluated for divisibility by the same divisor. In some cases the process can be iterated until the divisibility is obvious; for others (such as examining the last n digits) the result must be examined by other means. For divisors with multiple rules, the rules are generally ordered first for those appropriate for numbers with many digits, then those useful for numbers with fewer digits. Note: To test divisibility by any number that can be expressed as 2n or 5n, in which n is a positive integer, just examine the last n digits. Note: To test divisibility by any number expressed as the product of prime factors p 1 n p 2 m p 3 q {\displaystyle p_{1}^{n}p_{2}^{m}p_{3}^{q}} , we can separately test for divisibility by each prime to its appropriate power. For example, testing divisibility by 24 (24 = 83 = 233) is equivalent to testing divisibility by 8 (23) and 3 simultaneously, thus we need only show divisibility by 8 and by 3 to prove divisibility by 24. First, take any number (for this example it will be 376) and note the last digit in the number, discarding the other digits. Then take that digit (6) while ignoring the rest of the number and determine if it is divisible by 2. If it is divisible by 2, then the original number is divisible by 2. Example 376 (The original number) 37 6 (Take the last digit) 6 ÷ 2 = 3 (Check to see if the last digit is divisible by 2) 376 ÷ 2 = 188 (If the last digit is divisible by 2, then the whole number is divisible by 2) First, take any number (for this example it will be 492) and add together each digit in the number (4 + 9 + 2 = 15). Then take that sum (15) and determine if it is divisible by 3. The original number is divisible by 3 (or 9) if and only if the sum of its digits is divisible by 3 (or 9). Adding the digits of a number up, and then repeating the process with the result until only one digit remains, will give the remainder of the original number if it were divided by nine (unless that single digit is nine itself, in which case the number is divisible by nine and the remainder is zero). This can be generalized to any standard positional system, in which the divisor in question then becomes one less than the radix; thus, in base-twelve, the digits will add up to the remainder of the original number if divided by eleven, and numbers are divisible by eleven only if the digit sum is divisible by eleven. If a number is a multiplication of 3 identical consecutive digits in any order, then that number is always divisible by 3. This is useful for when the number takes the form of (n × (n − 1) × (n + 1)) Example. 492 (The original number) 4 + 9 + 2 = 15 (Add each individual digit together) 15 is divisible by 3 at which point we can stop. Alternatively we can continue using the same method if the number is still too large: 1 + 5 = 6 (Add each individual digit together) 6 ÷ 3 = 2 (Check to see if the number received is divisible by 3) 492 ÷ 3 = 164 (If the number obtained by using the rule is divisible by 3, then the whole number is divisible by 3)Example. 336 (The original number) 6 × 7 × 8 = 336 336 ÷ 3 = 112 The basic rule for divisibility by 4 is that if the number formed by the last two digits in a number is divisible by 4, the original number is divisible by 4; this is because 100 is divisible by 4 and so adding hundreds, thousands, etc. is simply adding another number that is divisible by 4. If any number ends in a two digit number that you know is divisible by 4 (e.g. 24, 04, 08, etc.), then the whole number will be divisible by 4 regardless of what is before the last two digits. Alternatively, one can simply divide the number by 2, and then check the result to find if it is divisible by 2. If it is, the original number is divisible by 4. In addition, the result of this test is the same as the original number divided by 4. Example.General rule 2092 (The original number) 20 92 (Take the last two digits of the number, discarding any other digits) 92 ÷ 4 = 23 (Check to see if the number is divisible by 4) 2092 ÷ 4 = 523 (If the number that is obtained is divisible by 4, then the original number is divisible by 4)Alternative example 1720 (The original number) 1720 ÷ 2 = 860 (Divide the original number by 2) 860 ÷ 2 = 430 (Check to see if the result is divisible by 2) 1720 ÷ 4 = 430 (If the result is divisible by 2, then the original number is divisible by 4) Divisibility by 5 is easily determined by checking the last digit in the number (475), and seeing if it is either 0 or 5. If the last number is either 0 or 5, the entire number is divisible by 5.If the last digit in the number is 0, then the result will be the remaining digits multiplied by 2. For example, the number 40 ends in a zero (0), so take the remaining digits (4) and multiply that by two (4 × 2 = 8). The result is the same as the result of 40 divided by 5(40/5 = 8). If the last digit in the number is 5, then the result will be the remaining digits multiplied by two (2), plus one (1). For example, the number 125 ends in a 5, so take the remaining digits (12), multiply them by two (12 × 2 = 24), then add one (24 + 1 = 25). The result is the same as the result of 125 divided by 5 (125/5=25). Example. If the last digit is 0 110 (The original number) 11 0 (Take the last digit of the numb
What does 10 to the 44th power equal?
1 followed by 44 zeroes.
Which is the 44th week of the year?
What is the 44th week of 2013
What is the 44th state in the union?
Wyoming was the 44th state in the Union...
Is Brack Obama the 44th president?
yes. he was the 44th president.
What number is President Obama of all the presidents?
the 44th president :)
What is the zip code for west 44th Street?
That would depend on which city you're talking about.
Who is this Obama person?
The 44th president of the United States.
What is Massachusetts' rank in size?
Massachusetts is the 44th largest state in the United States in terms of land area.
Who was the 44th preisident of the US?
Barack Obama IS the 44th President of the United States of America.
Was Bill Clinton the 44th president?
No. Clinton was the 42nd. Barack Obama is the 44th US President.
What was the 44th state to become part of the US?
Wyoming is the 44th state to become part of the Union.
Where is the location of MTV's TRL studio?
1515 Broadway between 43rd and 44th Streets, in the middle of Times Square in New York City
