length x width x height
A block is not a standard measure.
If you could show me the block of wood, then I could measure it and answer your question. For that matter, if you have the block of wood, you could measure it and answer your own question.
To measure a block of wood, use a tape measure or ruler to determine its dimensions: length, width, and height. For accuracy, measure each dimension at the widest or longest points, and record the measurements in inches or centimeters. If the block has irregular shapes, additional measurements may be needed to capture its contours. Finally, to find the volume, multiply the length, width, and height together.
millimetres or centimetres.
There are no disadvantages - unless you have a block against working with irrational numbers.
You would use a scale to measure the mass of a block. Place the block on the scale and record the reading to determine its mass.
You would typically use feet or meters to measure a city block, depending on the country.
Balanced .
The most appropriate metric unit to measure the mass of a concrete block is kilograms (kg).
You could use a spring scale or a force gauge to measure the force needed to pull a block out of a block tower. The scale would provide a reading in units of force, such as newtons or pounds, indicating the amount of force required to remove the block from the tower.
A block is not a measure of distance. You'd need to be more specific.
To determine the density of a block, you can use a balance to measure its mass and a ruler to measure its dimensions. The density of the block can then be calculated by dividing the mass by the volume.
Weigh the blockcalculate the volume of the block. This is done by measuring the length, height, and width of the block if it is rectangular. If it is some other shape then other mathematical formula apply. If it is an irregular shape for which no formula exists then you can estimate the volume by incremental methods or by displacement.divide weight by volume.
To find the density of a block, you can use a balance to measure its mass and a ruler to measure its dimensions. Divide the mass of the block by its volume (calculated from its dimensions) to determine the density.
A block is not a standard measure.
A street block is not a standard measure.
No, a barometer measures air pressure. Use a scale to measure the mass of a block.