36 cu m
work out the volume of the cube using length x width x height. If the 2-D measurements are in metres then convert the volume units into gallons. m3
In a rectangular aquarium, multiply the length, width, and height in inches and then divide the answer by 231 to get the amount of gallons the tank can hold.
To determine the volume of a water tank with dimensions 8 feet by 8 feet by 8 feet, you can use the formula for volume: length × width × height. Therefore, the volume is 8 × 8 × 8 = 512 cubic feet. This means the tank can hold 512 cubic feet of water.
The volume of water in a pool is caculated as followed Vol = area X Depth X 7.5 = gallons of water where as area is equal to width x length ( which is 18 x 33 ) so you need height or depth to finish the equations
Unfortunately you cannot calculate the amount of water a container can hold without knowing a third dimension. In order to find the volume of water that would be needed to fill a tank you'd need length, width, and height.
You need another dimension to figure out how much water it can hold, you need the height, length, and width.
The amount of water a 10 cm length can hold depends on the dimensions of the container it is in. If it is a symmetric shape like a cylinder or rectangular prism, you would need to provide the width and height of the container in addition to the length to calculate the volume and hence the amount of water it can hold.
The volume of ANY solid with linear sides is calculated in the same way. LENGTH x WIDTH x DEPTH! volume of the liquid = (length X breadth X height) of the rectangular box length x width x height = volume 12 inches x 6 inches x 8 inches = 576 cubic inches
A rough (high) estimate will use the volume of a rectangle. 155.42 US gallons
no, i cant answer that because i need the width and length too
work out the volume of the cube using length x width x height. If the 2-D measurements are in metres then convert the volume units into gallons. m3
Just multiply length x width x height.
In a rectangular aquarium, multiply the length, width, and height in inches and then divide the answer by 231 to get the amount of gallons the tank can hold.
To determine the volume of a water tank with dimensions 8 feet by 8 feet by 8 feet, you can use the formula for volume: length × width × height. Therefore, the volume is 8 × 8 × 8 = 512 cubic feet. This means the tank can hold 512 cubic feet of water.
The volume of water in a pool is caculated as followed Vol = area X Depth X 7.5 = gallons of water where as area is equal to width x length ( which is 18 x 33 ) so you need height or depth to finish the equations
Unfortunately you cannot calculate the amount of water a container can hold without knowing a third dimension. In order to find the volume of water that would be needed to fill a tank you'd need length, width, and height.
length X width by avg depth x 4.5 if a rectangle