Wiki User
∙ 6y agoWant this question answered?
Be notified when an answer is posted
baseball, baseboard, baseline, baseman, baserunner
you will need the base and the height of the traingle.the formula is 1/2 x base x height!!
27
22 5/6 yards. That is one 18 1/2 crossbar, one 10 foot base and two 20 foot arms for a total of 68 1/2 feet or 22 5/6 yards. -mikayla-
The answer depends on what sort of polygon forms the base.
The base word for "bored" is "bore."
baseball basebat baseboard
baseball, baseboard, baseline, baseman, baserunner
Yes, as an architectural term.It is subbase or sub-base to mean a baseboard or lowest pedestal part.
Yes, a baseboard heater is an electrical appliance that produces heat by converting electrical energy into heat energy. It is typically mounted along the baseboard of a wall and is used for heating rooms in residential or commercial buildings.
Some builders put the base all the way down in all areas. Works fine.
The amount of electric baseboard heat needed for a house depends on factors like the size of the house, insulation, climate, and personal preferences for room temperatures. A general estimate is that you need 10 watts per square foot, but it's best to consult with an HVAC professional to determine the right amount for your specific needs.
square the base frame and make sure base pieces are laid straight
Baseboard should be nailed every 16 inches to the wall studs, do not nail to just the sole plate as this can allow the base to tip away where it meets the wall at the top. Most drywall has a slight bevel on the edges and when drywall is hung horizontal this bevel ends up at the floor level.
Baseboard is actually very efficient. Baseboard can be used on 99% efficient boilers but also 60% efficient boilers. The boiler you are using may not be efficient at all. If you have large heating bills, make sure your building is insulated and the boiler is running correctly. If your boiler is 80% efficient, remember 20 cents of your dollar is going out the chimney!
He no longer needed a base in North America. (apex)
It can but it is not a good idea to to so. The heat emitted by the base board heater rises. Any wiring coming into contact with this heat will have to be de rated to a lower ampacity.