58 acres = 2526480 square feet.
So if the area is rectangular, and one side is 600 feet, the other is 2526480/600
= 4210.8 ft
or 4210 ft 9.6 inches.
Wiki User
∙ 14y agoA square-shape plot of land that is five acres would have four sides each measuring 466.69 feet long.
2 acres = 87120 sq feet so if it were 600 feet wide, it would be 145.2 feet long.
2000 ft * 298 ft = 59600 sq ft = 13.68 acres, approx.
0.137 acre.
This question cannot be answered because the width of the strip is not known. Acres is a measure of area, not length. Three separate examples are given below, all of which are "a strip of land 5000 ft long". 5,000 ft. by 1 inch wide = 0.009565 of an acre 5,000 ft. by 40 feet wide = 4.591 acres 5,000 ft. by 1,000 feet wide = 114.78 acres
There are 217,800 square feet in one acre. Therefore, 50 acres would be equivalent to 10,890,000 square feet.
17.975 acres.
A square-shape plot of land that is five acres would have four sides each measuring 466.69 feet long.
To convert feet to acres, you need to multiply the length by the width and then divide by 43,560 (the number of square feet in an acre). So, for a piece of land that is 2610 feet long and 300 feet wide: 2610 * 300 = 783,000 square feet. Then, 783,000 / 43,560 = approximately 17.98 acres.
2 acres = 87120 sq feet so if it were 600 feet wide, it would be 145.2 feet long.
The area is 500 feet times 600 feet = 300,000 quare feet. 300,000 quare feet are 6.887052 acres.
This would be just under 100 acres (99.3939 acres to be exact).
The cost of 21 acres of land can vary greatly depending on location, zoning, and other factors. It's recommended to consult with a real estate agent or appraiser to get an accurate estimate of the current market value.
One acre is 43,560 square feet. The conversion would be 8.26 acres.
One acre is 43,560 square feet. The conversion would be 2.41 acres.
There are 43,560 square feet in an acre. The calculation shows that it would be 1.033 acres.
2000 ft * 298 ft = 59600 sq ft = 13.68 acres, approx.