To find the value of (3m - 2x) given (m = 5) and (x = 4), substitute the values into the expression. This gives us (3(5) - 2(4) = 15 - 8 = 7). Therefore, (3m - 2x = 7).
This is not an equilateral triangle if height is 4 m the base is 6 m and by Pythagorean theorem the other sides are 5 m perimeter is 6 + 5 + 5 = 16m Area = base x height = 6 x 4 = 24 sq m
(- 2, - 4) and (- 7, - 1)First the slope is needed.m = Y2 - Y1/X2 - X1m = - 1 - (- 4)/- 7 - (- 2)m = - 3/5==========now, point slope form, use these points (- 2, - 4)Y - Y1 = m(X - X1)Y - (- 4) = -3/5[X - (- 2)]Y + 4 = - 3/5(X + 2)Y + 4 = (- 3/5)X - 6/5Y = (- 3/5)X - 26/5===============equation of the line
The perimeter of a rectangle is twice the length plus twice the width so half the perimeter is the length plus the width. If the perimeter is 12 m, then the length plus the width must equal 6. The dimensions could therefore be 1 m x 5 m, 2 m x 4 m, 3 m x 3 m (although this would be a square), 4 m x 2 m or 5 m x 1 m.
Square has 4 sides, so 4 x 1.25 = 5 m
The two points are (2,16) & ( 5,4) in ( x,y) form . Use the eq'n m = [y(1) - y(2)] / [ x(1) - x(2)] These numbers are labels , NOT factors/indices. Substituting m = [16 - 4] / [ 2 - 5] m = [ 12] / [ -3] m = -4 The slope. Being negative, on a graph, the line will go down from left to right.
100 cm = 1 m volume = length x width x height = 5 cm x 4 cm x 3 cm = 5 ÷ 100 m x 4 ÷ 100 m x 3 ÷ 100 m = 0.00006 cu m = 6 x 10^-5 cu m
slope, m = y2 - y1/ x2 - x1 = 5 -5/ 5 - (-4) = 0/9 => m = 0
That would be 0.000041
4/7 x 56 m = 4/7 x (7x8) m = (4x7x8)/7 m = 4 x 8 m = 32 m
This is not an equilateral triangle if height is 4 m the base is 6 m and by Pythagorean theorem the other sides are 5 m perimeter is 6 + 5 + 5 = 16m Area = base x height = 6 x 4 = 24 sq m
The volume of a cylinder equals the area of the base times the height, which equals pi x radius squared x height. Inserting the numbers, V = pi x (2 m.) squared x 5 m. = pi x 4 m. squared x 5 m. = 20 x pi meters cubed or 20 x pi cubic meters.
(- 2, - 4) and (- 7, - 1)First the slope is needed.m = Y2 - Y1/X2 - X1m = - 1 - (- 4)/- 7 - (- 2)m = - 3/5==========now, point slope form, use these points (- 2, - 4)Y - Y1 = m(X - X1)Y - (- 4) = -3/5[X - (- 2)]Y + 4 = - 3/5(X + 2)Y + 4 = (- 3/5)X - 6/5Y = (- 3/5)X - 26/5===============equation of the line
2 x 2 x 5 x 5 x m x m x n = 100m2n
Displacemant = Velocity x Time First D1 = 5 x 4 x 60 = 1200 m Then D2 = 4 x 3 x 60 = 720 m Total displacement = D1 + D2 = 1920 m
The perimeter of a rectangle is twice the length plus twice the width so half the perimeter is the length plus the width. If the perimeter is 12 m, then the length plus the width must equal 6. The dimensions could therefore be 1 m x 5 m, 2 m x 4 m, 3 m x 3 m (although this would be a square), 4 m x 2 m or 5 m x 1 m.
Square has 4 sides, so 4 x 1.25 = 5 m
As no indication is given as the the height of the walls and the slope of the roof, I'll assume it's a cuboid tent: volume = area_base x height = 4 m x 2.7 m x 5 m = 54 m3