0
What else can I help you with?
Derivation for workdone in isothermal process?
In thermodynamics, an adiabatic process or an isocaloric process is a process in which no heat is transferred to or from working fluid. The term "adiabatic" literally means an absence of heat transfer; for example, an adiabatic boundary is a boundary that is impermeable to heat transfer and the system is said to be adiabatically (or thermally) insulated. An insulated wall approximates an adiabatic boundary. Another example is the adiabatic flame temperature, which is the temperature that would be achieved by a flame in the absence of heat loss to the surroundings. An adiabatic process which is also reversible is called an isotropic process.Ideal gas:For a simple substance, during an adiabatic process in which the volume increases, the internal energy of the working substance must necessarily decrease. The mathematical equation for an ideal fluid undergoing an adiabatic process is,p.v^( γ )where P is pressure, V is volume, andγ =CP/CV=α +1 / α .CP being the molar specific heat for constant pressure and CV being the molar specific heat for constant volume. α comes from the number of degrees of freedom divided by 2 (3/2 for monotonic gas, 5/2 for diatomic gas). For a monotonic ideal gas, γ = 5 / 3, and for a diatomic gas (such as nitrogen and oxygen, the main components of air) γ = 7 / 5. Note that the above formula is only applicable to classical ideal gases and not Bose-Einstein or Fermi gases.For the derivation of work done in an adiabatic process, please visit the link I added below.
How much workdone is done when a weight of 10n is raised 2m vertically?
The work done is calculated using the formula: Work = Force × Distance × cos(θ). In this case, the force is 10 N, the distance is 2 m, and the angle θ is 0 degrees since the force and distance are in the same direction. Therefore, the work done is 10 N × 2 m × cos(0°) = 20 Joules.
What is the workdone by central force?
zero
Is applied force pulling or pushing?
it depends upon the systems displacement and your workdone
Why applying force to an object does not always result in work being done?
When a force (no matter how large it may be) is applied to any object without a distance being moved,it cannot be workdone because,workdone = force x distance.
Explain why applying force to an object does not always result in work being done?
When a force (no matter how large it may be) is applied to any object without a distance being moved,it cannot be workdone because,workdone = force x distance.
Give 1 example of problem solving for power?
power=workdone/timetaken or p=w/t
Is there is any workdone in fan when it is rotating and consuming electricity?
The work is done when the fan moves air, imparting kinetic energy to the air.
Is workdone is scalar or vector?
Work done is a scalar quantity. It is defined as the product of force and distance in the direction of the force, and does not have a direction associated with it.
A person carrying 60N object and moving 7m horizental distace and 5m vertical distace what is the workdone?
At least 300 newton meters, depending on the efficiency of his motion.
Colt DA41 can not find a serial no and would apprec any enformation you could give and Iknow that it needs some workdone as it will not lock up tight?
Try removing the grips.
What is force formula's?
According to Newtons 2nd law, Force = Mass x Acceleration Workdone = Force x distance Force = Mass x Gravitational constant Moments = Distance from pivot x force
What is electro static potential at a point?
it is defind as the amount of work done to bring a unit positive charge from infinity to that point in the electric feild it is devoted by V .: electric potential = workdone/charge V=w/q si unit is v
Can workdone by friction be positive?
No, work done by friction is always negative because it opposes the direction of motion. Friction always acts in the opposite direction to the force causing the object to move, resulting in a loss of energy and a decrease in the total mechanical energy of the system.
