One chain = 66 survey feet.
A chain is a measuring line in land-surveying consisting of of 100 jointed metal rods. Definition from the Shorter Oxford English Dictionary.
polar
linear land survey is too good
In 1620, the clergyman Edmund Gunter developed a method of surveying land accurately with low technology equipment, using what became known as Gunter's chain. This was 66 feet (22 yards) long and from the practice of using his chain, the word transferred to the actual measured unit. His chain had 100 links, and the link is used as a subdivision of the chain as a unit of length. A rectangle of land one furlong in length and one chain in width has an area of one acre. It is sometimes suggested that this was a medieval parcel of land capable of being worked by one man and supporting one family, but there is no documentary support for this assertion, and it would in any case have predated Gunter's work.
One chain = 66 survey feet.
Type your answer here... It is the method of land surveying in which only linear measurements are made. Chain surveying requires chain, tape and ranging rods. Chain surveying is not suitable for large areas having many details. (The term "details" means a natural or man-made features at or near the ground surface)
A shot in chain measurement refers to a traditional unit of length used in land surveying. One chain is equal to 66 feet or 22 yards. It was commonly used to measure distances in agricultural and land surveying applications.
A chain is a measuring line in land-surveying consisting of of 100 jointed metal rods. Definition from the Shorter Oxford English Dictionary.
The University of Florida offers classes in land surveying.
Chain surveying, also known as linear surveying, is a basic method of land surveying used to measure and map small and relatively flat areas. It is a simple and traditional technique that involves the use of chains or tapes to measure distances and basic instruments to measure angles. Chain surveying is often used for small-scale surveys such as creating maps for agricultural fields, small plots, or subdivisions. Here's how chain surveying works: 1. Measurement of Distances: In chain surveying, distances are measured using chains (typically 66 feet or 100 feet) or steel tapes. These chains or tapes are laid out along the linear features of the land being surveyed, such as property boundaries or roads. The total distance is obtained by chaining together multiple segments. 2. Measurement of Angles: Basic angles can be measured using a compass, theodolite, or other simple instruments. These angles are used to determine the direction of the surveyed lines and to calculate the layout of the land. 3. Stations and Offsets: The surveyed area is divided into smaller segments called "stations." At each station, measurements are taken to locate nearby features or boundaries, and perpendicular lines known as "offsets" are measured to mark points of interest. 4. Plotting: The data collected during the survey is used to create a scaled drawing or map of the surveyed area. The positions of boundaries, features, and angles are plotted on the map to create an accurate representation of the land. Advantages of Chain Surveying: **Simplicity:** Chain surveying is straightforward and requires minimal equipment and training. **Accuracy:** In relatively small and flat areas, chain surveying can provide accurate measurements for basic mapping purposes. **Low Cost:** It is a cost-effective method, making it suitable for smaller projects with limited budgets. Limitations of Chain Surveying: **Limited Coverage:** Chain surveying is not suitable for large or complex areas, as it becomes challenging to maintain accuracy over extended distances or rugged terrains. **Human Errors:** The accuracy of measurements in chain surveying can be affected by human errors, such as miscounting chain links or inaccurate readings. **Lack of Precision:** Chain surveying may not provide the level of precision required for detailed engineering projects or high-precision mapping. In modern surveying, more advanced methods such as total stations, GPS, and aerial surveys have largely replaced chain surveying for larger and more complex projects. However, chain surveying remains a valuable technique for smaller-scale surveys and in situations where advanced technology is not readily available or necessary.
The term for measuring land is "surveying." This involves determining the boundaries, size, and elevation of a piece of land.
Land surveying is mapping out land for land development. Hydrographic surveying is mapping bodies of water. Engineering is a type of surveying that has to do with buildings roads and other man made things.
polar
geomatics differ with surveying in that it encompasses a broad range of disciplines than surveying,let alone surveying is a discipline under geomatics
General classifications of surveying include geodetic surveying, plane surveying, topographic surveying, cadastral surveying, construction surveying, and hydrographic surveying. Geodetic surveying deals with large-scale measurements of the earth's surface, while plane surveying focuses on small-scale measurements on a flat surface. Topographic surveying involves mapping of the land's natural features, cadastral surveying deals with land parcel boundaries, construction surveying is used for building projects, and hydrographic surveying is for mapping bodies of water and their features.
linear land survey is too good