It is 14 more than 0. It is 13 more than 1. It is 12 more than 2. It is 11 more than 3. It is 10 more than 4. It is 9 more than 5. It is 8 more than 6. It is 7 more than 7. It is 6 more than 8. It is 5 more than 9. It is 4 more than 10. It is 3 more than 11. It is 2 more than 12. It is 1 more than 13. It is 0 more than 14. It is double 7. It is a half of 28. It is a third of 42. It is a quarter of 56. It is a fifth of 70.
It is more than half a litre!It is more than half a litre!It is more than half a litre!It is more than half a litre!
Performing more than one roles. Having more than one areas of responsibility or activity. Performing more than one roles. Having more than one areas of responsibility or activity. Performing more than one roles. Having more than one areas of responsibility or activity. Performing more than one roles. Having more than one areas of responsibility or activity.
more than a metre
3.5oz is more than 3.14oz
Yes. That would be the ideal wattage. When if comes to watts you don't want to wire speakers to a system that will push more wattage than they can handle. Think of watts as an amount of power. If you push more power through to the speakers than they can handle than you'll blow them. Example: [Stereo]-----60watts------>[Speaker with 45 watt capacity] = Not good. You can wire a speaker with a higher wattage capacity than what the stero will put out. Example: [Stereo]-----60watts------>[Speaker with 60 watt capacity] = Good. Example: [Stereo]-----60watts------>[Speaker with 75 watt capacity] = Good too.
A: Easily invent a perpetual moving machine
60 amps
1700/120 is 14.169 amps
80, all connected in series.
To calculate the current in the AC circuit, we can use the formula P = V * I, where P is power (60 watts), V is voltage (120 volts), and I is current. Rearranging the formula to solve for current I, we get I = P / V. Plugging in the values, I = 60 watts / 120 volts = 0.5 amps. Therefore, the current flowing through the circuit is 0.5 amps.
You use Ohm's Law to make your calculation. Volts = Amps x Resistance Amps = Volts / Resistance
Power = Current * Voltage Current = Power / Voltage Current = 60 W / 120 V Curretn = 0.5 A
Power = Volts * current [p = E*I]; 120volts*10amps = 1200watts
HERE'S AN EXAMPLE: IF THE POLARITY IS BACKWARDS AT A LIGHT FIXTURE THEN THE HOT (120VOLTS) WILL BE THE OUTSIDE OF THE LIGHT BULB SCREW SHELL AND THE MIDDLE PRONG INSIDE THE SOCKET WILL BE THE NEUTRAL -- THEREFORE WHEN YOU CHANGE THE BURNT OUT LIGHT BULB YOU WILL GET SHOCKED BECAUSE THE SCREW SHELL PART IS HOT!! IF WIRED CORRECTLY YOU WILL NOT GET SHOCKED BECAUSE THE HOT (120VOLTS) WILL BE INSIDE THE SCREW SHELL ON THE PRONG AND YOU WON'T BE TOUCHING THAT PART WHEN YOU CHANGE THE LIGHT BULB!!
What do u need for a dodge truck if u are needing to run a tool that is 120volts a inverter or converter
there is an address on the blade Rival mfg.co. Sedalia Mo.65301 model1030/7 125 watts 120volts 50-60HZ AC