answersLogoWhite

0

16 PT Paper is thicker.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Is a 16 pt paper thicker then a 14 pt?

Yes, a 16 pt paper is thicker than a 14 pt paper. The "pt" (point) measurement refers to the thickness of the paper, with one point equal to 1/1000 of an inch. Therefore, a 16 pt paper is 2 points thicker than a 14 pt paper, making it more substantial.


Which is greater 14 gauge or 16 gauge metal?

14 gauge is thicker than 16 gauge.


What is thicker 14 guage or 16 guage sheet metal?

14 gauge sheet metal is thicker than 16 gauge sheet metal. In the gauge system, a lower number indicates a thicker material; thus, 14 gauge has a greater thickness compared to 16 gauge. Specifically, 14 gauge is approximately 0.075 inches thick, while 16 gauge is about 0.0598 inches thick.


Is 16 gauge steel bigger than 14 gauge steel?

GAUGE , is one inch thick of steel or metal. So, take this one inch thick of steel sheet and cut it into 12 equal thickness sheets , you get a 12 gauge steel sheet. Similarly, take this one inch thick of steel sheet and cut it into 14 equal thickness sheets , you get a 14 gauge steel sheet. and so on . So, a 12 gauge steel sheet is thicker than 14 gauge , 14 is thicker than 16 , 16 is thicker than 18 and so on. Wrong!!! See my discussion on this...


Which flatware is thicker 16 or 18 gauge?

16 ga is thicker than 18 ga.... the lower the number the thicker the wire size


What is thicker 12 microns or 16 microns?

16 microns is 4 microns thicker than 12 microns.


Is 18 gauge sterling thicker than 16 gauge?

16 Gauge is thicker than 18....in England..the width of the jewelery is: 18 GA = 1.0mm 16 GA = 1.2mm :D


Is 7 gauge thicker than 16 guage?

i 7 guage smaller than 16 guage


What are the release dates for Thicker Than Water - 1935?

Thicker Than Water - 1935 was released on: USA: 16 March 1935


Is a 12 micron can liner thicker than a 16 micron can liner?

No, a 16 micron can liner would be thicker than a 12 micron can liner. The thickness of a can liner is measured in microns, with a higher micron value indicating a thicker liner.


What is thicker 12 mil or 16 mil?

The "mil" is shorthand for thousandths of an inch (0.001") so 16 mil (0.016") is thicker than 12mil (0.012").


Is 16 gauge pipe thicker than 20 gauge?

yes