copper is positive
Depending on colours of course black is usually negative and the other colour (generally red but depends) is positive. Get a D-cell Battery. Now get two pieces of speaker wire. hold one wire on the positive terminal of the battery and hold the other on the negative side of the battery. touch the wires to the positive and negative posts on the speaker. if the cone moves out ward the positive and negative are correct if it moves inward then the positive and negative are reversed (out of phase.) this simple test will allow you to see which terminal is which. Get a D-cell Battery. Now get two pieces of speaker wire. Hold one wire on the positive terminal of the battery and hold the other on the negative side of the battery. Touch the wires to the positive and negative posts on the speaker. If the cone moves outward the positive and negative are correct if it moves inward then the positive and negative are reversed (out of phase.) this simple test will allow you to see which terminal is which.
The color of the wire does not indicate its polarity. In electrical systems, the polarity is typically designated as positive (+) and negative (-) rather than plus or minus. To determine which wire is positive or negative on a lamp connection, you would need to consult the manufacturer's instructions or use a multimeter to check the voltage.
Because the colour of a "negative wire casing" is black, hence the reason why negative numbers were written in this colour :)
All you have to do is turn on the car into ignition area and grab a voltage meter. Find positive first, to do this, find a good ground spot on your vehicle, such as a screw or metal, than with the red meter wire, go around til you find one that makes the volt meter go up... that is your power wire. Now, go from that wire, and check for your ground wire. Hold the positive wire onto the positive spot on your vehicle, and use the black wire to check until the meter goes up, that is your ground. Now you are done.
Ok for all you crazy people the because i made a mistake and hooked the wires up backwards so the ribbed wire is negative.
The red wire is Positive, (+) and the Black wire is Negative. (-)
Black = Negative Black + White = Positive Tried and tested.
The positive speaker wire is red while the negative speaker wire is black on a 2008 pathfinder.
Yes, the red wire is a positive wire (+) and the black wire is a negative wire (-) :D
Red is positive, Black is the negative
On the car battery, the positive wire is red and the negative wire is black. If the body of the car is metal or conducts electricity, then the body of the car serves as the negative wire. The metal in the engine serves as the negative wire.
The ribbed wire on an extension cord is typically the neutral wire. The black wire is usually the hot wire. It's important to check the manufacturer's instructions or consult a professional if you are unsure.
The black wire means negative and the red wire means positive if that's what you where asking
Black for negative and red for positive.
Red to positive, black to negative
Negative - (Black) is Ground, Positive + (Red) is Hot. Ground wire goes to Negative (Black) it goes from negative on battery to engine for ground.