0
Braided line is the best!!
Braided line is much better then the cheap, crappy line that is supplied with a trimmer. The supplied line is much cheaper, but you can not edge or cut around fences without the line snapping. Braided line is awesome depending on the thickness you use. If you are planning to have a perfect job trimming your lawn I would recommend a gas trimmer, you can pick a cheap gas weed whacker for about $70, and then upgraded to a braided string. The braided string cost about $10 depending on the thickness and size of spool. Braided string is worth the cost though!!
Yes the star, or braided line, while more expensive, is superior to any other line currently available, though the quality of the specific line will vary depending on manufacturer.
The reason for it's superiority include the fact that a round, an oval, or even a square line, (square line, though hard to find, is available), has a lower tensile strength than the braided line. this is due to the design of the string.
To keep the answer a little more simple, what type of edge cuts a steak most effectively, a round one, or one that is pointed? Along with this, the braided line has bulk, (size, or diameter), and multiple points where the sharp edge(s) make contact, whereas the oval line only has two.
Add your answer:
Earn +20 pts
Does a regular trapezoid have line symmetry?
Yes it does.
Why is a rectangle sometimes a regular polygon?
it is not a line segment
Does a regular pentagon have line symmetry?
Yes, it has multiple.
Do all regular polygons have line symmetry?
yes
What polygon has rotational and line symmetry?
All regular polygons do.
What is thickest braided string trimmer line available?
I use .155" for my push-style trimmer (Echo Bearcat). I'd like something thicker, but haven't yet found anything.
How do you string a dual line remington trimmer?
It is easy to string a dual line Remington trimmer by following the instructions in the manual. The manual was supplied with the trimmer when purchased.
What is the best way to replace the weed wacker line on a trimmer?
To replace the weed wacker line on a trimmer, first, turn off the trimmer and disconnect the power source. Then, remove the spool housing and take out the old line. Cut a new line to the appropriate length and thread it through the trimmer head following the arrows. Finally, secure the line in place and reassemble the trimmer.
What is the best method for replacing the weed trimmer line on a string trimmer?
To replace the weed trimmer line on a string trimmer, follow these steps: Turn off the trimmer and disconnect the power source. Remove the spool housing by pressing the tabs or unscrewing the cap. Take out the old line and cut a new piece to the appropriate length. Insert the new line into the trimmer head following the arrows for the correct direction. Reassemble the spool housing and test the trimmer.
Can braided fish line be stretched?
no
How much is replacement line for a Poulan Pro trimmer?
You can expect to pay about $5 for replacement line for a Poulan Pro trimmer.
Can a 115 trimmer line be replaced with another trimmer line of a differen gauge?
Yes it can, but the line does not last as long. My experience has taught me that the smaller the line the shorter the lifespan.
How do you change the trimmer line on a 5 HP Briggs and Stratton trimmer mower?
craftsman
What is the purpose of a line trimmer?
A line trimmer, also known as a string trimmer, is used to trim grass or weeds. The piece of equipment also goes by the name of a weed eater, or weed whacker.
How can you replace the trimmer line mac 2816?
Locate the trimmer head at the shaft. Remove debris in the head. Cut a 14-inch piece of the trimmer line and fold it. Place the spool against the spindle. Feed the ends of the line through the eyelets. Push the spool down and pull the trimmer line tight with your hands. Tighten the spool.
What is braided fishing line made out of?
hair
How to install trimmer line properly?
To install trimmer line properly, first, make sure the trimmer is turned off and disconnected from power. Then, remove the spool housing and take out any remaining old line. Cut a new piece of trimmer line to the appropriate length and insert it into the spool, following the arrows for the correct winding direction. Finally, reassemble the spool housing and trim any excess line.
