0
Add your answer:
Earn +20 pts
What is the difference between 5.8 and 3?
It is 5.8 minus 3 = 2.8
What is the difference between -3 and -3?
Zero. In general, the difference between any number and itself is zero.
What is the difference of -4 and -3?
-1
What does the difference between 8 and 5 mean?
8 - 5 = 3 so the difference is 3
What is the difference in 43 and 40?
The difference between 43 and 40 is 3.
What difference between using 4poles circuit breaker and using 3 single pole breakers?
3 pole would be for 3 phase, 4 pole would be 3 phase & neutral
Developed diagram of 3 phase 2 pole 24 slots induction motor?
pole=2 slots=24 phase=3 slot/pole/phase =6 (1)
Is 3 phase power and 3 pole power the same?
3 Phase power is supplied by a 3 pole supply like a breaker. So essentially yes.
3 pole circuit breakers?
3 pole circuit breakers are used for 3 phase lines
What is the phase difference between in two voltage phases in 3 phase distribution system?
The phase difference between any two live lines is 120 degrees, which allows them to peak in turn in the 360-degree cycle.
What is the difference between 4-pole changeover switch and 3-pole changeover switch?
4-pole changeover switch connects also the neutral wire. 3-pole changeover switch connects only the 3 live wires.
What is the difference between a 2- pronged cable and a 4 - pronged cable?
2 prong is a hot and neutral and a 4 prong is a 3 phase with a ground wire.3 pole 4 wire meaning 3 hots could be 240 volts or 480 volts
Difference between 3 PHASES OF MATTER in terms of MOLECULES IN MOPTION?
what are the difference amount of the 3 phase of matter? example of solid liquid and gas
What is an acceptable difference in resistance between phases on a 3 phase motor?
The currents between legs of a three phase circuit should be within about 10% of each other.
How many different types of alternator are there for a 1998 fore contour?
type 1: single phase tree phase poly phase type 2: rotating armature rotating field type 3: salient pole machine non salient pole machine type 1: single phase tree phase poly phase type 2: rotating armature rotating field type 3: salient pole machine non salient pole machine
What is the difference between a tpn mccb and a 4 pole mccb?
The difference between a tpn mccb and a 4 pole mccb is rather negligible. The only real difference is that a 4 pole mccb works a little bit faster and allows for a strong network connection. The connection with a 4 pole mccb is just a bit more reliable.
Why does a 3 phase motor turn slowly?
An induction motor relies on low-frequency currents induced in the rotor by the difference in speed between the rotor and the rotating magnetic field. At sychronous speed the induced current is zero therefore the torque is also zero.
