I cannot imagine this being acceptable, unless there is some emergency situation that requires completing the lift at the specific time.
Because log(2) to the base 10 is 0.3010 which is approx 0.3. Using logs changes a multiplicative difference [factor of 2] to an additive difference [of log(2)].
The lowest factor is 2 and the highest is 11 so the difference would be 9.
No, x^2 - 10 cannot be factored further because it is a difference of squares.
You can find the balance factor of a node by finding the difference in height of its children.
25
Because log(2) to the base 10 is 0.3010 which is approx 0.3. Using logs changes a multiplicative difference [factor of 2] to an additive difference [of log(2)].
There is no difference between "factor of safety" and "safety factor." They are two ways of saying the same thing.
Because of the difference of 1, those two numbers have one (1) as their only common factor. Therefore, the answer is 1.
the factor that made the most difference would be the climate
17 and 4 have a difference of 13 and is a factor pair of 68
The lowest factor is 2 and the highest is 11 so the difference would be 9.
No difference.
Power factor is well defined and measures the difference between the phase of current and voltage. It varies from 1 to zero with 1 being associated with a pure resistive load. Since you multiply voltage times current to compute instantaneous power; if they are out of phase then you get reduced power. A power booster, in this context, would be a device that was designed to compensate for the our of phase situation and bring the phases more in line, effectively boosting power.
a factor is what you multiply by a multiple is the answer
No difference in case of DC. In case of AC Watt refers to Power which includes the factor of power factor. VA does not include power factor.
Usually for a power factor lower that 90% a service charge will be added to the monthly electrical bill. On power factor correction calculations try to get the power factor up to 95%.
The difference between a single-factor and multi-factor region is that a single factor region is based on a single physical feature and characteristic. A multifactor regions is based on multiple physical features and characteristics.