400ml x B = 1000ml
bit of algebra solves this.
0.408 In the above number, the "4" holds the tenths position, the "0" to its right holds the hundredths position, and the "8" holds the thousandths position.
The amount of a substance that a liquid holds will be the solubility of that substance in that volume of the liquid - at that temperature.
It holds 160 quarts.
An 8GB USB unit
A 1,000 cubic foot tank holds up to 7,480 US gallons of water.
The volume of a gas can be determined by measuring the volume of the container that holds it
A glass that holds one pint will hold more water compared to a one cup measuring cup, as 1 pint is equivalent to 2 cups.
One official holds the end on a measuring tape at the front middle of the throwing circle. Another official pulls the other end of the tape and holds it at the front middle of where the shot hit the ground. The measurement is taken from there.
The engine capacity is calculated by measuring the size of a crankcase. The crankcase is the space that holds the pistons.
0.5l as 250ml is 0.25l
Your question confuses me. Please explain it more.
About 12 13 kernels if 1 cup measuring cup can hold 165 dried corn kernels.
One glass of water is usually about 8 ounces. (110 divided by 8) That is about 14 glasses of water.
A one cup measuring cup holds 8 ounces. one pint equals 16 ounces one quart equals 32 ounces a half gallon equals 64 ounces a gallon holds 128 ounces8 oz
the top of the engine will hold the most oil it uses 1400ml to 1600ml put 1400ml in first check dip stick add more if needed the crank side holds 400ml i recommend a non synthetic castrol gtx 10w40
1 and a half liters of water is equal to 6 measuring cups. Each measuring cup typically holds about 250 ml of liquid, so 1.5 liters (1500 ml) would require 6 measuring cups.
beaker holds the H2o been measured by the graduated cylinder