0
A Synchro Motor is a Elecrical motor consition out of a single-phase Inner/Rotor windings, and a Three-phase Outer/Stator windings. The Outer/Stator windings are connected Electricly in a Star formation. ... ie: The inner ends of each the three windings are connected to one another. And the outher ends will then be connected to another Synchro Motors outer ends. The Inner/Rotor windings are connected to a single-phase AC power supply. The Rotor Windings in turn transfer energy over to the Outer/Stator windings. The Stator Windings are 120 degrees appart. And therefore depending on the Rotation of the Inner/Rotor Windings the Outer/Stator Winding get a different magnatude of magnetic flux, transferring a different amout of current flow to each of the three Outer/Sator windings. That bring us to the use of a Synchro Motor: ... A Syncrhro Motor works in pairs of 2 or 3, and are used to transfer rotational oriantation from one Synchro motor to another. Depending on how the Synchro Motors are connected to one another you can mirror the rotation from the first motor to the second. For standard Synchronigation you would connect The 3 Outer/Stator windings as such (1-1) (2-2) & (3-3). To mirror the Rotation you could connect (1-2) (2-1) & (3-3). Remember I said you could have 3 Synchro motors... The Third is wired differently inside... it has 3 Inner/Rotor windings & 3 Outer/Stator windings. The Rotor & Stator winding are connected in a star formation. The third Synchromotor bring about a difference in rotation. You could add or subtract rotational oreantions. A = Synchro Motor 1 ...B = Synchro Motor 2 (with 3 Stator & 3 Rotor windings) ...C = Synchro Motor 3 A+B=C Or A-B=C Synchro motors are used in ships, for opening & clossing valves from the bridge to for instance the Engine room. A more advanced system of the synchro technology integrates with a Servo Motor, that in turn can controls the rudder of the ship. Other uses are in Analoge computers & Electronic Weapon Guidence Systems.
Still curious? Ask our experts.
Chat with our AI personalities
Judy
Devin
ProfessorAdd your answer:
Earn +20 pts
What is the function of the tegmentum?
Controls Motor Functions
What is the function of the musculocutaneous?
The function of the musculotaneous nerve is to supply motor fibers to the biceps brachii and brachialis muscles as well as providing cutaneous sensation of the lateral forearm.
How does a motor function?
a motor is powered by electricity in the motor you have winds of wire that take an electric charge,this is dischached thru a magnet. this in turn creates a feild which drives the stater and makes the motor spin that is how a motor works an engine however works on pistons compressing a liquid enuff to turn it into gas which is then ignited by a spark plug in a gasoline engine, or purely by compression in a diesel engine the burning of the fuel creates pressure which in turn forces the piston down ,which turns the crankshaft,which turns the drive train
How do you calculate the skew angle on the motor shaft?
To calculate the skew angle on a motor shaft, first measure the distance between the centerline of the motor and the centerline of the shaft at both ends. Then, determine the angular displacement by using trigonometric functions, specifically the tangent function, where the skew angle (θ) can be found using the formula θ = arctan(opposite/adjacent). Ensure to account for any misalignments and verify measurements for accuracy.
Is the relation a function?
Not every relation is a function. But every function is a relation. Function is just a part of relation.
