Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
A 0-10A ammeter has a guaranteed accuracy of 1.5% of full scale reading.The current measured by the instrument is 2.5A.Calculate the limitting values of current and the percentage limitting error.
Accuracy = Measured or calculated value/True Value
Accuracy
Yes it is measured in cubic units
Look on the equipment for where it says the plus or minus figure for accuracy (for a burette it is usually + and _ 0.1cm3) divide this by the amount you measured , times 100 to make it a percentage. ---- ---- Percentage Error = Maximum Error / Measured Value X 100 For example.Maximum Error for the following apparatus are:Balance = +/- 0.01Pippette = +/- 0.1 And the Measured value for each are:Balance = 0.15Pippette = 25 Then...the percentage error is:Balance percentage error = 0.01 / 0.15 X 100 = 66.66%Pippette percentage error = 0.1 / 25 X 100 = 0.3% You can now also work out your maximum total error.Maximum total Percentage error = Balance Percentage error + Pippette Percentage errorMaximum total percentage error = 66.66 + 0.4 = 67.06%
Accuracy
To calculate the accuracy of an analytical method, you can compare the results obtained from the method to a known standard or reference value. This can be done by performing samples with known concentrations or properties and then measuring the accuracy by determining the percentage error between the measured values and the known values. The accuracy can be expressed as a percentage or a confidence interval.
Accuracy of measurement refers to how close a measured value is to the true or accepted value of the quantity being measured. It reflects the degree of precision and correctness of the measuring instrument or method used. Accuracy is often expressed as a percentage error or deviation from the true value.
A 0-10A ammeter has a guaranteed accuracy of 1.5% of full scale reading.The current measured by the instrument is 2.5A.Calculate the limitting values of current and the percentage limitting error.
Accuracy = Measured or calculated value/True Value
Percentage error in a chemistry experiment is a measure of the difference between the measured value and the actual value, expressed as a percentage of the actual value. It helps to determine the accuracy and precision of the experimental results. A lower percentage error indicates higher accuracy, while a higher percentage error indicates lower accuracy.
significant figures.
accuracy
Accuracy
A measured quantity is said to have good accuracy if it is close to the true value or target value that is being measured. This means that there is minimal systematic error or bias in the measurement.
Yes it is measured in cubic units
No, the purity of platinum is measured in percentages. It is typically expressed as 950 or 900, indicating that the metal is 95% or 90% pure, respectively. Carats are used to measure the purity of gold.