Most of the current travels on the surface of the wire. The more strands the more surface area and the lower the effective resistance.
Jack was sure he'd filled the car with petrol, but he checked the fuel gauge just to be certain.
A radius gauge takes the guesswork out of designing or duplicating a part, no matter what size. Arc Master Radius Gauges
Either by the gauge size or using millimeters.
Surface area of a sphere = 4*pi*radius squared
To calibrate a machinist's square, you can use a surface plate and gauge blocks. Place the square on the surface plate and use gauge blocks to check if the blade is perpendicular to the surface. Adjust the square if necessary to ensure accuracy.
It depends on the surface finish of the workpiece. For machined surface a magnetic base dial indicator is used. For rough or un-machined surfaces a surface gauge is used.
I use a fuel pressure gauge.
I would recommend you use 1/0 gauge
it helps in laying out the work accurately
12 gauge
It is a measuring gauge use to measure length and with
The Eurasian continent is the largest contiguous landmass on the Earth's surface. It is unlikely that there will ever be a standard railway gauge used on all Eurasian railroads.
What gauge string you use is all about personal preference. There is no gauge that is "good" for it its what you like and can use comfortably.
A 16 gauge or 14 gauge are the most common for lip piercings.
No.No.No.No.
A marking gauge is used for marking out lines to be cut.