0
What else can I help you with?
Bobby has a 5 liter container and a 3 liter container and an unlimited supply of water How can he measure out exactly 4 liters?
You have to have something else to build the 4 liters into. Call it The Tub.Fill the 5.Pour the 5 into the 3.That leaves 2 liters in the 5.Pour them into The Tub. You now have 2 liters in The Tub.Empty the 3.Fill the 5.Pour the 5 into the 3.That leaves 2 liters in the 5.Pour them into The Tub. You now have 4 liters in The Tub.QEDYou do not have a TUB, it is not in the problem.Fill the 5 liter containerPour it into the 3 liter container leaving 2 liters in the 5 liter containerEmpty the 3 liter containerPour the 2 liters from the 5 liter container into the 3 liter containerFill the 5 liter containerFill the remainder of the 3 liter container from the 5 liter containerSince the 3 liter container already had 2 liters in it, one liter from the 5 liter container will fill it leaving 4 liters in the 5 liter container.Solved
How many pennies will you need build a stack with the height of 5 cm?
A penny has a thickness of 1.55 mm, so 5 cm = 50 mm. (50 mm)/(1.55 mm) = 32.26, so 32 pennies will be slightly less than 5 cm (4.96 cm)
How many bricks can transport in 40 feet container?
Oh, dude, it's like you're planning a brick-themed party! So, technically, in a 40-foot container, you can transport around 23,040 bricks if each brick is the standard size of 8 x 4 x 2. But hey, who's counting, right? Just make sure you don't accidentally build a wall with all those bricks in there!
What is difference between partial differentiation and total differentiation?
We use differentiation to find the rate at which a function changes as its input changes. This can give us information about the rate at which a physical process is occurring, or about how a physical quantity changes with position, for example. Partial differentiation gives us an extra facility: it is a way for us to find out about the change in a function that depends on more than one input. In real problems, physical quantities very commonly depend on more than one physical variable and we need to know how the quantity changes as we change any of these variables. For example, the sediment build-up on a river bed may be described by a function representing the thickness of the sediment. This function will depend on one or more spatial coordinates (i.e. whereabouts on the bed we look) and will also depend on time. That means we can ask two quite different questions about the sediment thickness: how rapidly does the sediment thickness change as we move over the bed, at any particular time, or how rapidly does the thickness change in time, at any particular point on the bed. Notice that these questions are about two totally different physical characteristics of the sediment build-up. The main point to remember about those two questions is the following. When we are concerned about how the thickness changes as we change one of the variables, we want to keep the other variable fixed. So if we look at different positions we do it at a particular time and if we're looking at different times we do it at a fixedposition. That idea is at the heart of the process of partial differentiation.
How many bricks does it take to build a 12x20 utility building?
The number of bricks needed to build a 12x20 utility building depends on various factors, including the design, wall thickness, and whether the building has windows or doors. On average, a standard brick measures about 7.5 inches long, 3.5 inches high, and 2.25 inches wide. Assuming solid brick walls with no openings, you might need around 1,200 to 1,500 bricks, but it's best to consult with a builder for a more accurate estimate based on specific plans and requirements.
Is it bad to put a carbonated drink in a stainless steel container?
It is not recommended to put a carbonated drink in a stainless steel container for an extended period of time as the pressure from the carbonation could build up and potentially cause the container to leak or release the pressure suddenly when opened, leading to spillage. It is better to use containers designed for carbonated drinks with pressure release valves to avoid this issue.
How do you build a pressurized system?
How do you build a pressurized system for a container system?
What metal will have to use if you build a car that will not rust?
Stainless steel, like the Delorean.
What materials to build St. Louis arch?
stainless steel and a steel frame :D
Can you think of any unique uses for a stainless steel rod in home decorating?
There are several possible uses for stainless steel rods. They can be used to build rigs to place lighting on. You can build a theme home using stainless steel rod in home decorating. Use the steel rod on the ceiling to give your room a cyber look.
What material was used to build the St. Louis arch?
stainless steel over steel frame
What is a good company to buy a stainless steel oven from?
Whirpool has been known for decades to build quality products and they have several stainless steel oven models. I would recommend going with one of theirs.
How can you relate temperature and volume with pressure?
if you have a closed bottle or can, etc. , of water and you heat it up to a high enough temperature, then pressure builds up, right? Well if the container is filled with water then the pressure will build up faster, causing the container to burst, but if the container is only filled maybe halfway, it will take a little longer for the pressure to build up enough to cause the container to burst.
How do you build solar water distiller?
To build a simple solar water distiller, you can use a container to collect water, a clear plastic sheet to cover the container, and a smaller container placed inside to catch the distilled water as it evaporates and condenses on the plastic. Place the setup in direct sunlight to heat the water and create condensation, which will then drip into the smaller container as clean, distilled water.
Why do canisters pop when dry ice is added?
Because, the dry ice releases gases that build within the closed container, and when there is too much presure, the container pops.
How do you build a cylinder?
Cut a circle from a piece of paper. The paper has thickness so, that makes the circle that you cut from the paper a cylinder.
What is the minimum rotor thickness for rear of 2003 Subaru Forester?
The minimum rotor thickness for the rear brakes off a 2003 Subaru Forester will depend on the build date of the vehicle:Models up to June 2003 use 266mm solid rotors. The minimum thickness is 8.5mmModels from July 2003 onwards use 290mm vented rotors. The minimum thickness is 16mm
