0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the difference between cut in half and cut into halves?
There is not much or a difference, though cutting into, "Halves" means cutting something in half, then cutting it in half again.
What is the present tense of cut?
I/you/we/they cut. He/she/it cuts. The present participle is cutting.
A board 8 feet 6 inches long is cut into 3 pieces How long is each piece?
8 feet 6 inches = 102 inches. If the three pieces cut are equal in length then each would be (102/3) = 34 inches long (not accounting for material wasted in the cutting process).
When cutting asphalt with an asphalt saw how do you determine how many linear feet you have cut?
Asphalt can be cut using the same equipment which can cut concrete. Asphalt cutting machine has a diamond dusted circular saw blade, with diameter ranging from 300 mm to 500 mm. The cutting depth varies from 80 mm to 170 mm depending on the size of the blade and power of the engine.
How do you cut a square cake into twelve equal parts with four cuts?
Cut the cake lengthwise and then crosswise. Stack the four pieces and then cut crosswise at one third the length and again at two-thirds the length. Done!
What are some of the methods used in laser cutting on a sheet of metal?
There are many different methods in cutting using lasers, with different types used to cut different material. Some of these methods are vaporization, melt and blow, melt blow and burn, thermal stress cracking, scribing and cold cutting and burning stabilized laser cutting.
How is math used in cutting hair?
Math is used in cutting hair, because of the angle of the cut.
What were some methods of cutting and transporting stone?
Stone was traditionally cut using tools like chisels, hammers, and saws. For transportation, methods such as sledges, carts, and boats were commonly used to move the stone. Later on, machinery like cranes and trucks revolutionized the cutting and transportation of stone.
What will happen to the focal length of a lens if it is cut into half vertically?
Cutting a lens in half vertically will not change the focal length. The focal length of a lens is determined by its shape and curvature, which remain the same after cutting.
How did Aztecs cut hair?
They used a cutting material. :D
What method was used in cutting meats?
old people use to sharpen the sotne edges and use them for this purpose i.e to cut meats etcold people use to sharpen the sotne edges and use them for this purpose i.e to cut meats etcold people use to sharpen the sotne edges and use them for this purpose i.e to cut meats etc
How is it possible to cut down the cost of one's automobile insurance?
There are several different methods that one can use in order to cut down the cost of one's automobile insurance. Some of these methods are: cutting rates, and changing insurance providers.
What saws cut plastic?
Aluminum Cutting Carbide Tipped Saw Blades are used for cutting plastics
What is hair cutting?
A layer hair cut is when your hair is cut in a style so that there are different lengths to the cut. The lengths tend to start around the ear and that would be the shortest length. Under than would be a longer length, and then a longer etc.
Side-cutters or Diagonal cutting pliers should be used to cut?
Side-cutters or diagonal cutting pliers should be used to cut wires, cables, and other materials where precision cuts are required. They have a cutting edge that is angled to provide a clean cut close to the surface.
What types of materials are ideal for waterjet cutting methods?
It is great for cutting titanium. If you do cut it, it will create dust particles in the air and you have to be careful breathing them in. It is great for metal that is all ready deformed.
What is the past present present continuous past conntinuous of cut?
The present of cut is cut -- I cut the lawn every weekThe past of cut is cut -- I cut the lawn yesterdayThe past participle of cut is cut -- I have cut the lawn all my lifeThe present participle of cut is cutting. -- I am cutting the lawn now.The present continuous is formed with -- am/is/are + present participleSo for cutting present continuous is -- am cutting, is cutting, are cuttingThe past continuous is formed with -- was/were + present participleSo for cutting past continuous is -- was cutting, were cutting
