0
To provide accurate dimensions, I'll need to know which specific fort you are referring to, as there are many forts worldwide, each with its own unique dimensions. Generally, forts can vary significantly in size, with some covering several acres and others being much smaller, often measuring hundreds of feet in length and width. If you specify a particular fort, I can give you more detailed information.
What else can I help you with?
What are the Dimensions of a silver dollar?
U.S. silver dollars issued from 1836 to 1935 have the following approximate dimensions: Diameter - 38.1 mm; early dates were slightly larger Weight - 26.7 gm Composition - 90% silver, 10% copper There were slight variations over that century but the above values are the most common dimensions.
What is the math term for approximate?
It is approximate!It is approximate!It is approximate!It is approximate!
What is the approximate perimeter of the classroom?
To calculate the approximate perimeter of a classroom, you need to know its dimensions. Typically, the perimeter can be found by adding together the lengths of all four sides. For a rectangular classroom, the formula is P = 2(length + width). If you provide the specific measurements, I can help you calculate the exact perimeter.
What are the dimensions of a 65 TV?
A 65-inch TV typically has a diagonal screen measurement of 65 inches. The dimensions of the TV can vary depending on the model and design, but a common aspect ratio is 16:9, which results in approximate width and height dimensions of about 57 inches wide and 33 inches tall. The thickness can vary, but it usually ranges from 2 to 4 inches. Always check the specific model for exact measurements.
What is a three-dimentional shape?
On paper = 2 dimensions Physical = 3 dimensions Examples: a square is 2 dimensions and a cube is 3 dimensions a circle is 2 dimensions and a ball is 3 dimensions
What are the approximate dimensions of the Caribbean tectonic plate?
36,000Km square
What are the dimensions of the click-clip Dakota Unisex pocket watch?
The approximate dimensions for the Dakota Cuff Clip pocket watch are: 3.5" x 1.5" x 0.33" (depth) Approximate weight: 2.1 oz.
What dimensions for a GE dishwasher model number GSD4260J00SS?
APPROXIMATE DIMENSIONS (HxWxD) 34 in x 24 in x 25 3/4 in
What are the dimensions of a 747 jet?
Approximate dimensions; wing span 212 ft. length 231 ft cockpit height 32 ft tail height 64 ft
What are the dimensions of Jamestown fort?
The original Jamestown fort, established in 1607, was a triangular structure measuring approximately 120 feet on each side. The fortification included wooden palisades and was designed to protect the early settlers from potential attacks. Its dimensions facilitated the construction of various buildings within the fort, including barracks and a church. The fort's layout was critical for the survival and organization of the colony during its early years.
Approximate distance from NashvilleTN to Fort Meyers FL?
It is 827 miles which is 12 hours and 52 minutes.
Size of 30 gallon drum?
Dimensions are 970mm high by 580mm diameter
Where can you meet between Tampa Florida and ft lauderdale Florida?
It appears that Fort Myers is the approximate half way mark.
What is the distance in miles from Fort Lauderdale to Honolulu?
The distance in air miles from Fort Lauderdale, Florida to Honolulu, Hawaii is 4,861 miles. This corresponds to an approximate flight time of 10 hours and 13 minutes.
How many miles is it from fort laramie to fort bridger?
The distance mentioned between the above mentioned places is 377.91mi . This is an approximate driving distance. The actual driving distance may differ according to the path chosen.
What instrument measures an aquarium?
A tape measure. All you need are approximate dimensions since they come in standard sizes-usually in increments of 5 gallons.
What size model number 253.6172201A?
if you are referring to the Kenmore Refrigerator that has this model number, then the approximate dimensions of this model is 65" height x 28.5" width x 29" depth. i have this model fridge and provide the dimensions that were taken from measuring the actual fridge.
