A standard 8-foot pool table typically has markings that include the diamond-shaped side pocket indicators and the spot for the cue ball. The diamond markings are usually spaced about 12 inches apart along the long rails and are located approximately 1/4 of the way from each end. The center spot where the cue ball is placed for break shots is usually located at the midpoint of the table, which for an 8-foot table would be 4 feet from either end. Specific measurements can vary slightly depending on the manufacturer and model.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
No, 36in=3ft 3ft is too high.
4,500 gallons.
You didn't mention shape, however if a rectangle it would be approximately 7,300 gallons
Yes, using two 3ft x 3ft tiles.
There is no layout on a pool table except the location of the foot spot. This is located in the same location regardless of table size. It is located at the intersection of the centerline of the table and the second diamond from the foot end.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
No, 36in=3ft 3ft is too high.
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
4,500 gallons.
100 cm is how tall it is. If you mean what is that in imperial measurements, it's just over 3ft 3in.
You didn't mention shape, however if a rectangle it would be approximately 7,300 gallons
9ft2
Yes, using two 3ft x 3ft tiles.
3ft
You need more information. But, let's assume the pool is 8 feet deep at the deep end and 3 feet at the shallow end. If the pool is rectangular, the total volume will be 28,798 gallons of water.
3ft = 36" 1"=2.54cm therefore 36x2.54=91.44 there are 91.44cms in 3ft