0
A threaded hole with a minor diameter of approximately 2.61 inches and a thread pitch of 11 threads per inch (TPI) indicates it is likely a 2.5-inch nominal size with a coarse thread. The actual major diameter can be calculated based on the TPI and the thread profile. In this case, the major diameter would be around 2.75 inches, consistent with standard measurements for 11 TPI threads.
What else can I help you with?
What is a penny's diameter in millimeters?
There are several countries in which the minor currency unit is a penny - including the US where a cent is called a penny!The UK penny has a diameter of 20.3 mm.
What is the distance between two sides of a circle called?
The longest distance across a circle is its diameter and the shortest distance is a minor chord
How do you work out width of oval?
To calculate the width of an oval (ellipse), you need to measure its major and minor axes. The major axis is the longest diameter, while the minor axis is the shortest. The width of the oval can be represented by the length of the minor axis, which indicates its width at the widest point perpendicular to the major axis. If you have the semi-minor axis (half of the minor axis), the width can be expressed as 2 times the semi-minor axis length.
What is the area of the minor segment of a circle when a chord is drawn perpendicular to its diameter of 16 cm dividing it in a ratio of 3 to 1?
It is approx 39.31 square cm.
What is the circumference of a circle when the arc is 30 degrees and minor arc is 8?
The circumference of a circle is 360 degrees. The circumference of a circle is also 2*pi*radius or diameter*pi.
What is the significance of the m5 minor diameter in the context of mechanical engineering?
The m5 minor diameter is important in mechanical engineering because it determines the size of the internal threads in a screw or bolt. It is a critical dimension that ensures proper fit and functionality of threaded components.
What is the maximum allowable minor diameter for M6x1.0 interenal threads?
the minor diameter should fall between 4.917mm - 5.153mm
What are the major and minor axes of an ellipse?
The major axes of an ellipse is its longest diameter. The minor axes, on the other hand, is the shortest diameter.
What is the largest allowable minor diameter for an M6x1.0 screw thread?
the minor diameter should be between 4.917mm and 5.153 mm, so the largest allowable size is 5.153mm
Stress on minor diameter of bolt when bolt is subjected to longitudinal force?
The stress on a bolt under longitudinal force is the total force on the bolt divided by the stress area. The stress area is a little bigger than the minor diameter area, calculated from the average of the minor diameter and pitch diameter. The total force on the bolt is its torque preload plus the (bolt stiffness/(bolt +member stiffness) x (externally applied load )
What is the semimajor axis of a circle of diameter 24 cm?
The major and minor axes of a circle are the same - either is any diameter. So a semimajor axis is half the diameter which is 12 cm.
What is screw diameter?
There are all sorts of screw diameters - major, minor, pitch, mean, etc., but in general a screw diameter is a called by its nominal diameter which is the major diameter of the screw, approximately. For example a 1/2 inch screw has a nominal diameter of 1/2 inch.
What is a penny's diameter in millimeters?
There are several countries in which the minor currency unit is a penny - including the US where a cent is called a penny!The UK penny has a diameter of 20.3 mm.
What planet diameter is less than one half the length of earth diameter?
Mercury. It has a diameter of around 4880km, while Earths diameter is 12104 km on average.
What planet's diameter is less than one-half of the length of Earth's diameter?
Only Mercury (Pluto also was in there, but it's now a "minor planet).
What are the steps involved in sprocket manufacturing process?
ForgingForging Blank send to MachiningPreturning Inner Diameter & widthCNC Ist Set up for Outer Diameter & WidthCNC II nd Set up for Outer Diameter & widthHobbing DOPBroaching Minor IDChamferingDeburring
What is the distance between two sides of a circle called?
The longest distance across a circle is its diameter and the shortest distance is a minor chord
