0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
If the 8085 add 89h and 79h specify the contents of the accumulator?
In the 8085, if the accumulator starts as 00H, then adding 89H and 79H to it results in a value of 02H with CARRY set.
What is the function of an accumulator?
An accumulator is a register that is a part of a processor. It has more/faster instructions than other registers. Examples:/360: no accumulator8080: A6800: A and B8086: AX80386: EAXx86-64: RAXThe accumulator in an automatic transmission softens the shift between gears.
Where the result of arithmetic logical operations are stored?
ACCUMULATOR
What is a mull set?
'Mull Set' . I think you mean 'NULL SET'. This means a set with no elements, or an empty set.
What does the mean tell you about a set of data?
The mean tells the sum of the whole set of data.h
What does accumulator mean in British?
Accumulator is what the British call a capacitor.
What do you mean by reset?
To reset something is simply,putting it back to how it started,and to set something is to make it right,ie to set a watch
When to replace a manifold line and accumulator?
There is no set millage for when you should replace a manifold line and accumulator. Most mechanics only replace when the accumulator and/or manifold lineÊstart to fail.
What are the instruction to reset RST 7.5?
To reset the pending RST 7.5 instruction in the 8085, you need to execute a SIM instruction with a particular value in the accumulator. PUSH FLAGS MVI A,10H SIM POP FLAGS Of course the PUSH and POP are optional, if you don't need to preserve the value of the accumulator.
If the 8085 add 89h and 79h specify the contents of the accumulator?
In the 8085, if the accumulator starts as 00H, then adding 89H and 79H to it results in a value of 02H with CARRY set.
If the accumulator has C5H from a previous instruction and the carry flag is set then what will be the contents of the accumulator and carry flag after executing the instruction ADI 94H?
If you add 94H to C5H with the ADI instruction, the result in the accumulator will be 59H and the carry flag will be set. It does not matter what value the carry flag had to start with, because you said ADI, instead of ACI. (For ACI, the result would be 5AH with carry set.)
Is there such a term as resetted?
No, the correct term is "reset". That's because the past participle of the verb "set" is just "set" itself (e.g. "I have set ..."). Since "reset" is based on "set", its past participle is also "reset".
Full form of s-r flip flop?
set reset flip flop
To draw diagram of accumulator?
A mechanical, or electrical accumulator???
What are the tenses of reset?
The three forms are the same: reset, reset, reset.This is true for 'set' (or put or hit, etc.)
How do you reset your pin on cable remote?
just re-set it by going to reset? obviously
What is the size of the accumulator of a 64bit processor?
The size of the accumulator is the same,means 64bit.
