25mm is just a tiny bit over 1 inch!
Divide by 1000 to change millimeters to meters; 25mm = 0.025m.
No. The inch measure is described as "nominal". It is likely to be 25mm * 25mm
62.5
Almost exactly 1 inch.
25mm cable
The given dimensions are incorrect for it to be a square because a square has 4 equal sides and its area in square units is: a side times a side.
The amperage rating is dependent upon the insulation rating. A pair of 25mm squared wires touching each other are rated at 131 amps. Three 25mm squared wires touching each other are rated at 110 amps.
If 16mm is the overall diameter of the cable, yes - If that's the diameter of one core, then no.
Wait until 25mm to be sure, but most likely yes because a yolk sac should be seen at 13mm.
You have to be specific. whether the conductor is aluminum or copper. Current carrying capacity will be different for these two types. Copper cable can take more load than aluminum cable for same diameter.
2.5*10-5 km in 25mm
Yes it is. 19cm=190mm. 25mm=2.5cm.
25mm is just a tiny bit over 1 inch!
25mm = 0.025 meters (you divide mm by 1,000 to convert to meters).
Divide by 1000 to change millimeters to meters; 25mm = 0.025m.
cable size for the 90kW motor is 3CX150sqmm aluminum cable