In electrical terms, "NC" stands for "Normally Closed." It refers to a type of switch or relay contact that is closed (allowing current to flow) when the switch is not activated. This configuration is commonly used in safety circuits and control systems, where a continuous connection is needed until a specific action occurs to open the circuit.
No Credits.
The mean, or the average.
That's the definition of the "mean" or "average" of that group of terms.
The arithmetic mean.
.
RLA in eletrical terms is Reading Language Arts.
In automotive terms, "NC" typically stands for "No Charge," indicating that a service or part is provided at no cost to the customer. It can also refer to "Non-Compliance," which describes a vehicle that does not meet certain regulatory standards. Additionally, in some contexts, "NC" may refer to specific models or designations within automotive brands.
Most have 4 year terms.
Raleigh, NC has a street with the name Xebec Way. Asheville, NC has a street with the name Xanadu Drive.
No Credits.
nc means "not connected"
In terms of hot,neutral,ground, the neutral is classed as the common. In regards to a switch which has a NO, NC, C. This is classed as a C form switch. It has a common terminal, a normally open terminal and a normally closed terminal. Depending on the position of the switch handle the circuit can be either open or closed.
As many as he or she wants.
No they are not.
Batteries.
NC on a schematics typically stands for "No Connection" meaning that nothing is to be connected to that node.
nc: Normally Closed (contact is closed when power is not applied) no: Normally Open (contact is open when power is not applied) Applies to a relay ex...: when power is applied to a relay the no(Normally Open contact will close and allow current to flow between two terminals on relay).