well yes it simpal
The grade of bolts refers to their strength and load-bearing capacity, which is determined by their material composition and manufacturing process. Commonly, bolt grades are indicated by a number (such as Grade 2, Grade 5, and Grade 8 in the U.S.) or by a marking system that denotes their tensile strength and hardness. Higher-grade bolts can withstand greater stress and are used in more demanding applications. Understanding the grade is essential for ensuring the proper selection of bolts for specific engineering and construction tasks.
i was on a grade 3 with my employer I have now been put on grade 4 I do not know why
They will be in Grade 3 . Grade 1 : 6 Grade 2 : 7 Grade 3 : 8 Grade 4 : 9 Grade 5 : 10 Grade 6 : 11 Grade 7 : 12 Grade 8 : 13 Grade 9 : 14 Grade 10 : 15 and so on.
It is 12%, which is a fail grade.
The same grade as you are in. (:
A type of indicator of the temper (grade) of the bolt. I think 3 lines = grade 8. other bolts use different indicators, too. on japenese bolts, sometimes a dot is used so they can count revolutions to reach desired torque of bolt without using torque wrench. hope that helps ya.
3/8 bolts with standard SAE threads that are no less than one inch long. these bolts will have a 9/16 head. i recomend GRADE 8 bolts. lesser grade bolts will work but can sheer. i used 1 1/4 inch long bolts on my big block with no issues. oh and there are 6 bolts that go from bell to block
3/8 by 3inch grade 8
The grade of bolts refers to their strength and load-bearing capacity, which is determined by their material composition and manufacturing process. Commonly, bolt grades are indicated by a number (such as Grade 2, Grade 5, and Grade 8 in the U.S.) or by a marking system that denotes their tensile strength and hardness. Higher-grade bolts can withstand greater stress and are used in more demanding applications. Understanding the grade is essential for ensuring the proper selection of bolts for specific engineering and construction tasks.
They replace the factory body mounting bolts.
3/8-16x1 1/4 grade 8
3/8-16x1 1/4 grade 8
Absolutely. The grade of bolt has nothing to do with rust resistant properties.
Grade 10.9 bolts or capscrews have a minimum tensile strength of 1040N/mm2 and a hardness of 320 - 380Hv10. Grade 12.9 bolts or capscrews have a minimum tensile strength of 1220N/mm2 and a hardness of 385 - 435Hv10. The 12.9 fastener is therefore a higher grade (hardness and tensile strength) fastener compared with 10.9 grade
They are grade eight, and a special length. Do not use a normal bolt.
grade 3
i love you dimple