Q: What if not a rod of 36 inches is any standard of measurement?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

About three humans (2.9 standard smoots), slightly under one rod or 200 inches or 16'5"

One rod equals exactly 16.5 feet, or 16' 6".No longer commonly in use, the term comes from the standard length of a surveyor's rod, used to measure the borders of farms and fields. 320 rods equaled one mile.

198.

dumb

1 rod is 16.5 feet (16 feet 6 inches).

Related questions

rod

The standard length for a shower rod is 5 feet. It is approximately between 57 to 61 inches long.

The optimum height for a curtain rod is 2 to 3 inches above the frame.

A standard shower curtain rod is approximately 5-feet long to fit a standard tub size of 60-inches in length. Most shower curtain rods have an adjustable size of 57-inches to 61-inches but some are longer to accommodate a 6-foot long tub.

A rod is a unit of measurement equal to 16.5 feet. This is equal to 16.5 x 12 = 198 inches. There are 2.54 centimetres in one inch. Therefore, 198 inches is equal to 2.54 x 198 = 502.92 centimetres.

About three humans (2.9 standard smoots), slightly under one rod or 200 inches or 16'5"

The weight of a wood dowel rod can vary depending on its diameter and length. As a rough estimate, a 1-inch diameter wood dowel rod that is 36 inches long can weigh around 0.5 pounds. It's best to weigh the specific rod you have for an accurate measurement.

The rod originated historically as a unit of measurement in Europe, with varying lengths depending on the region. It was typically around 16.5 feet or 5.029 meters. The rod was commonly used for land measurement purposes before standardized units were established.

Because these shower rods are customizable for length, they can be installed into any standard shower.

To find the area of a square rod in square inches, you would square the length of one side of the rod, which is typically given in inches. So if the rod has sides of 1 inch each, the area would be 1 inch x 1 inch = 1 square inch. If the sides are 2 inches each, the area would be 2 inches x 2 inches = 4 square inches, and so on.

A rod was defined as 16.5 feet, which is 198 inches.

One rod equals exactly 16.5 feet, or 16' 6".No longer commonly in use, the term comes from the standard length of a surveyor's rod, used to measure the borders of farms and fields. 320 rods equaled one mile.