-13 multiplied by 10 equals -130. This is because multiplying a negative number by a positive number results in a negative product. Therefore, -13 x 10 = -130.
13x10=130 13x3=+ 39 169 if you times it by 3 then 10 u would timesing it by 30
1302 = 16,900A handy shortcut you can use is if you know that 132 is 169, you can do(13x10)2 = (13)2(10)2 = 169 x 100 = 16,900.
To calculate the area of a room, you multiply its length by its width. For a room that measures 13 feet by 10 feet, the area is 13 x 10 = 130 square feet. Therefore, the room has an area of 130 square feet.
total wight-500gm size-13x10 what is gsm?
total wight-500gm size-13x10 what is gsm?
There are 10 millimetres in a centimetre, Multiplying by 10 gives us the answer in millimetres. 13x10 is 130 millimetres,
13x10=130 13x3=+ 39 169 if you times it by 3 then 10 u would timesing it by 30
530
Its 130. An easy way to do this is by using logic, rather than math. Since 13x13 = 169, and 16900 = 169x100 = 169x10x10, 16900 = (13x10)^2
To set up your 13x10 North Point tent, start by laying out the tent fabric on the ground, ensuring the door faces the desired direction. Assemble the poles according to the instructions, inserting them into the designated sleeves or clips on the tent. Once the structure is upright, secure it with stakes at all corners and tighten the guylines for stability. Finally, check for any loose areas and adjust as needed for optimal tension.
1302 = 16,900A handy shortcut you can use is if you know that 132 is 169, you can do(13x10)2 = (13)2(10)2 = 169 x 100 = 16,900.
To calculate the area of a room, you multiply its length by its width. For a room that measures 13 feet by 10 feet, the area is 13 x 10 = 130 square feet. Therefore, the room has an area of 130 square feet.
It is 10 + 3 + 0.8
As current passes through steel, it heats up from resistive heating. As it heats up, it expands. A typical coefficient of thermal expansion for steel is 13x10-6 m/m K but the exact coefficient of thermal expansion of steel depends on the type of steel. For example:Coefficient of Linear Thermal Expansion for:(10-6 m/m K)(10-6 in/in oF)Steel13.07.3Steel Stainless Austenitic (304)17.39.6Steel Stainless Austenitic (310)14.48.0Steel Stainless Austenitic (316)16.08.9Steel Stainless Ferritic (410)9.95.5
0.75 (kJ/kg K) is the specific heat of concrete