answersLogoWhite

0

What else can I help you with?

Related Questions

What is the wrench size needed to for oil change dran plug for Toyota camery 2000?

For a 2000 you still have the 5S-FE motor I believe, which would be 15mm. If you have a 1zz-FE, probably 1/2 in or 17mm.


What is the volume of 1 meter of 15mm pipe?

The volume of 1 meter of 15mm pipe can be calculated using the formula for the volume of a cylinder: πr^2h. Given the radius of the pipe (15mm/2 = 7.5mm) and the height (1 meter), you can plug these values into the formula to find the volume.


How many mm are 1.5 cm?

15mm - you just times it by 10!! (move the decimal place 1 place to the right)!


How you install a starter 1996 corscia?

it depends on what engine you have mostly all gm cars have 2 15mm bolts that you have to remove and a 11/32nds nut on one wire and the other nut can be from 1/2 inch socket 13mm to a 11/16, 17mm socket to remove make sure you disconnect the battery first


15mm is equal to how many inches?

15mm = 0.59 inches. Direct Conversion Formula 15 mm* 1 in 25.4 mm = 0.5905511811 in


15mm into centimeters?

15 millimeters =1.5 centimeters 10 millimeters=1 centimeter


How much water is held in 1 meter of 15mm pipe?

235.7 cubic centimeters


Quantity of cement in plaster of 1m2?

cement require for 1 sqm plaster 1:2 for 15mm thickness


What is 17mm in inches?

0.6692913386 in Direct Conversion Formula 17 mm* 1 in 25.4 mm = 0.6692913386 in


How many inches is 17mm?

0.6692913386 in Direct Conversion Formula 17 mm* 1 in 25.4 mm = 0.6692913386 in


How many inches in 17mm?

0.6692913386 in Direct Conversion Formula 17 mm* 1 in 25.4 mm = 0.6692913386 in


How do you remove the top nut of front shock absorber driver side on a 2004 E-350 RV chassis?

It takes a very long time to get it off. You hold the top with a 15mm open end wrench with the handle over top of the coil spring. Then you turn the shock body with a 17mm wrench up near the top. It will probably be very rusty. You can only turn the shock 1/6 of a turn at a time and there are a lot of threads. After I finally got the top off, I broke the bottom post off trying to get the nut off.