One psi (pounds per square inch) is 27.7 inches of water.
An inch of water is a unit of pressure which will raise water one inch. A cubic inch of water weighs 0.0361 pounds, so one psi is one over 0.0361 or 27.7 inches of water.
To convert inches of water to psi (pounds per square inch), you can use the conversion factor: 1 inch of water is approximately equal to 0.0361 psi. Therefore, 11 inches of water would be calculated as 11 x 0.0361 psi, which equals approximately 0.3971 psi.
To convert psi (pounds per square inch) to inches of water column, you can use the conversion factor that 1 psi is approximately equal to 27.7 inches of water column. Therefore, 5 psi is equal to about 5 x 27.7, which equals approximately 138.5 inches of water column.
One pound per square inch (psi) is approximately equal to 27.68 inches of water column (inH2O). This conversion is based on the density of water and the gravitational force acting on it. Therefore, if you have a pressure of 1 psi, it corresponds to about 27.68 inches of water height.
One meter of head is approximately equal to 0.145 psi. This conversion is based on the density of water and the acceleration due to gravity. Specifically, 1 meter of water column exerts a pressure that can be converted using the formula: pressure (psi) = height (meters) × 0.4335. Thus, for 1 meter, the pressure is roughly 0.145 psi.
1 centimeter equates to 0.393701 inches.
There are 46.15 inches of water in a 20 psi pressure. This can be calculated using the formula: 1 psi = 2.307 feet of water, which is approximately 27.69 inches. 20 psi x 27.69 inches/psi = 46.15 inches.
27.71 inches of water column equals 1 psi
To convert inches of water to psi (pounds per square inch), you can use the conversion factor: 1 inch of water is approximately equal to 0.0361 psi. Therefore, 11 inches of water would be calculated as 11 x 0.0361 psi, which equals approximately 0.3971 psi.
To convert psi (pounds per square inch) to inches of water column, you can use the conversion factor that 1 psi is approximately equal to 27.7 inches of water column. Therefore, 5 psi is equal to about 5 x 27.7, which equals approximately 138.5 inches of water column.
1 psig is equivalent to 51.71 mm (2 in) of mercury or to approx 700 mm (27.5 in) of water. Technically one cannot have apsig. Psig represents a pressure reading of the pressure above normal atmospheric pressure of 14.7 psi. You mean a psi.
If we have six (6) feet of water, that will convert to about 2.6 psi (pounds per square inch).
1 psi (pound per square inch) is equivalent to 27.7 inches of water column. Therefore, 6 inches of water column is approximately 0.216 psi. To convert psi to ounces per square inch, we can use the conversion factor: 1 psi = 2.036 oz/in^2. Therefore, 6 inches of water column is equivalent to approximately 0.44 oz/in^2.
27.7 "h2o
One meter of head is approximately equal to 0.145 psi. This conversion is based on the density of water and the acceleration due to gravity. Specifically, 1 meter of water column exerts a pressure that can be converted using the formula: pressure (psi) = height (meters) × 0.4335. Thus, for 1 meter, the pressure is roughly 0.145 psi.
30 inches of mercury = 14.73 psi (1 inch of mercury = 0.491 psi So, 30 x 0.491 = 14.73).
1 in of water is equal to 2.49082 mBar. Just multiply by 4
50.5 cm is approximately 1 foot and 7.91 inches when converted to feet and inches.